Search results

On a 7m? Impressive Sent from my SM-J320V using Tapatalk

I'm taking my time this build, glad to see its showing! Turbo out and getting rid of the 83divided housing, it spools super quick but chokes up top. Replacing it with a 1.00 AR recommended by full race Sent from my SM-J320V using Tapatalk

Sent from my SM-J320V using Tapatalk

I'm running a 18x10.5 +22 with a 275/35 and room to go to a 40 sidewall. A 40 sidewall compared to a 35 is roughly an inch taller You should be ok. I do have my fenders rolled and pulled aswell. Take some measurements to make sure it'll fit your ride. If you have coilovers, they could be...

Today was such a nice day, took the soup out for a drive and did some tuning. Running 18psi of boost and only 11 degrees timing, she pulls hard! Although the 83a/r exhaust housing choked up top in higher gears, I'm impressed... I will end up switching out to the 91 or 1.0 rear housing...

Rebuilt the power steering pump with all new seals, crush gaskets, and topped off with fresh atf fluid... Took her out for a long cruise my my buddies mk4, she's loving the boost! Feel just as quick as my old hx35, only on 10psi waste gate pressure! I also started to Mockup/make a template...

Thise look great! This is definitely on my to do list... Cars getting faster, I need some better stopping power Bogwon, if you ever find yourself passing through Tri cities area, I'd love to see if my wheel clear the calipers. They are the "mesh" type but do have a higher +22 offset so I'm...

Fender has finally been painted and installed! Friend of mine did amazing work on it, looks so good and the flare it has is perfect 9614 by scot sheedy, on Flickr 9611 by scot sheedy, on Flickr Snapchat-90203777 by scot sheedy, on Flickr Snapchat-46995010 by scot sheedy, on Flickr Sent from my...

Cleaned up the wiring for the electric fans IMG_20170306_195405 by scot sheedy IMG_20170306_201139 by scot sheedy, on Flickr IMG_20170306_201148 by scot sheedy, on Flickr IMG_20170308_122631 by scot sheedy, on Flickr IMG_20170308_122602 by scot sheedy, on Flickr Sent from my QTASUN1 using Tapatalk

Gave the air filter a bath and tie wired my power steering reservoir. The bracket developed a crack so I'll need to get thst welded back up Sent from my SM-J320V using Tapatalk

Reworking the harness a bit by running my coils and injectors to their own fuses on the fuse block. Will make testing and troubleshooting much easier to pull a single fuse at one location Sent from my SM-J320V using Tapatalk

Just about ready to get my fender back, this time till be all red. Install this weekend! Sent from my SM-J320V using Tapatalk

Turner pick a part in Oregon Sent from my SM-J320V using Tapatalk

Just wow. The new piping and fitment of the turbo is great. You did an amazing job and looks like it put down some good numbers on low boost! Sent from my SM-J320V using Tapatalk

Sent from my SM-J320V using Tapatalk

just came across this :'(

The snow finally melted off the roads so I took the car for a spin. Went through 2 tanks of fuel today with all sorts of driving. So... Im hoping to get the car down to PSI this next month (Feb) and get a solid tune so I can finally enjoy the car. Also, my speedometer has always been a...

Had someone ask if I was still running the factory fuel damper on the rail, I still am. Heard of some issues with high flow fuel pumps and no dampers so I decided to keep mine. Just welded a 6an fitting on the end of the factory banjo Hate to cover up the nice aem cam gears and belt, but I'd...

I've heard of this especially when breaking in a street bike engine, hence the name ;) The only head work I've done was springs, retainers and seals so there really isn't much there to "seat" like valves would. Really the only thing to break in is the rings. I'll give the shop that is tuning...

All I can say is wow. This turbo spools crazy fast, well at least what I'm use to. Seems that full boost is roughly 3600rpm, I was only running 10psi wastegate pressure only a couple times until I finish breaking in the engine. Lots of varying gears and ram with lots of vacuum coasting to...