Search results

Any help is much appreciated been searching with no luck thus far.

http://www.youtube.com/watch?feature=endscreen&v=mcImDU2FcEQ&NR=1

So as many of you know me and my struggles with my 7M after my last BHG i decided to go a different route and picked up a 1jz and this is where ill begin this thread. The last time my 7M drove under it's own power My 7m at the end My 7m Now Here's photo's of the new...

So as many of you seen i am parting out my 7m-gte it was definitely a bad day for me but all is well in my life so i'm staying in the supra game and i picked this up 1JZ with a T4 Garrett GT37R not exactly my turbo of choice but hey can't complain. Just a teaser more to come Here's a...

Ok so the last couple days it has been extremely humid where i live 90% or more which is very uncommon here normal year round is about 0-15% Ever since the rain has started and the humidity has increased my car has started running very rich and pulling less Vacuum at idle and driving. Vac...

So guys i figured i'd move on to my next issue since i finally fixed my harness issues :) It's not a big one but none the less one i'm having trouble getting the problem to go away. I'm running a Stock Fan Clutch (Autozone brand) and Water pump with a Dayco Belt Every time my Fan clutch...

So last night we set a couple runs for my buddy's 1JZ Supra here are the video's First up was the 97 Celica 3SGTE (FWD) on 14psi http://www.youtube.com/watch?v=p3MBBG2qUzI Second to race the Supra was a Saturn Ion Redline Full Stage 3 (Not sure what that mean's but you can google it)...

So I'm planing on soon enough purchasing a FFIM from Seth (sleeper designs) but i a few questions and thoughts about how I want to run and set it up. At first I plan on just running a stock ECU,ISC,TPS Questions start with the keeping or ditching the egr should I keep it and ask Seth to custom...

So I got offered $4500 cash for my car today. Just wanted to know if you guys think i should take it and start over. My car is a 1989 Turbo Targa Mods Valve job was done about 8,000miles ago. Ct26 60-1 (5,000miles) Driftmotion intercooler kit Tial 50mm knock off Walbro 255 (2,500miles) Oem...

http://www.youtube.com/watch?v=2SIBLmDNhT4

So my buddy's 1jz swapped Mk3 vs a local 350z. Mods for the 1jz Full 3inch exhaust Stock twins 16psi R154 act 6puck Bridge stone street radials 255/r16 AFPR Intake Shell is gutted from front seats back. Had 115lb passenger 350z rumored to be a S tune Owner says just exhaust...

So I have a code 52 ever since I did my hg job (finished about 2 weeks ago) I re wired the knock sensors with new clips and no luck next I'm putting new sensors in. But out of curiosity is it possible that code 52 can be thrown because I really do have detonation?. Other behaviours...

So i got a AVC-R and installed it today. I was wondering if anyone could explain some of the things like injector duty cycle and solenoid duty. Some of the basic settings and some how too's. I will have some more specific questions along the way as son as i get done cleaning up the...

So i just need a little clarification for piece of mind on this. So the avc-r has these colored wires. Red (power) purple (rpm or injector signal) Green (ground closest to ecu) Black (ground farthest from ecu) Gray (throttle) White (speed signal) Now I just want to run the harness...

OK so i got everything together and my car won't fire it cranks and you can here the exhaust burping but no cigar. Fuel pump turns on with Fp and B+ jumped also seeing almost 40psi in fuel pressure. I have aftermarket fuel injector clips (EV6 i think) and 560cc injectors off a evo 8. I think...

So I am having no luck finding a 02 sensor before tomorrow so i think I'm just going to hard wire my old one into the harness but i need some help figuring out what wire goes were. I have a 89 turbo grey plug ecu from California. Its has a newer harness witch I believe came from a non...

I'm trying to replace my cps today my car is a 89 greyplug I was wondering if I can use a green plug CPS without issue I know it plugs right into my grey plug harness but does it work correctly ? 89-92 have a grey plug 87-88 have a green plug

So i decided i want to replace the two studs that hold the Oil pipe from the turbo to the block with 12mm Nuts. Can anyone be so kind to tell me the size i need so i can see if i can find it at a local hardware store. Also do you think it would be wise to use a slightly longer stud ...

So i searched around the TSRM and haynes pos manual and can't find what i managed to mis place. There is a threaded whole directly under the 90degree hose that connects to the thermostat on the exhaust side of the engine. Just trying to figure out what goes there because unfortunately I...

http://www.youtube.com/watch?v=1jaiMzLhliA http://www.youtube.com/watch?v=rNRHPr7Gabk http://www.youtube.com/watch?v=y-RJeqyh-vI