Search results

well i have a question about tunning with the pro, when i apply the gas pedle my afr' go lean then dip back into acceptle rich area's when i start my car it has an irractic idle when she's cold. (also notice she starts lean) whats a safe cruize afr? and at what point on my...

well i dont know about any of you, but i was pretty happy to have my car back together for the fourth of july.. any how, this is a little vid that we captured, on the fourth, hope every one had asmuch fun as i did. i'll have one up on put file in a few minutes. Click here to...

from when i first got my car running and took it to the track the first couple of times.. ive shaved a second of the times you see in the vide since then.. ~edit! i removed the video due to this version did not have the drag racing in it at the end, and this one over all sucked... new...

well after 3 long days, (very hot washington weather!) the motor has came out, w/ head off due to bhg, . shimmed the oil pump & new timming belt. prepped for mhg, picked up my rebuilt head w/ 3 angle grind & n/a cams (turbo cams were in bad shape.. ) well it's never fun to work in the...

is this a decent one ? http://www.horsepowerfreaks.com/price/Toyota/Supra_86-92/Perma_Cool/Cooling/Oil_Filter_Relocation_Kits/part/Single_Filter_Relocation it seems to be a universal and if it will get the job done i think it's worth while.

is it safe to remove some of the cam material at the base of the cam? i was looking at new cams for toyota's (stuff at college) and noticed the base is alot thinner then what is in the 7m, i was thinking i could have my other cams cleaned up and lightened.. is it worth the time? could take a...

im looking for the web site for the local drift org... they run at pir , and are located through out portland and south wa, thnx for any help.

well i got my alarm, and most the stuff is pretty basic, plug in conectors and place them close enough that you dont have to extend the existing wires,.. (3-7 feet long) but im not sure how im gona continue to use my apexi tt , i noticed the alarm has a ign harness. and thats how the hks...

well guys, i was furtunit enough to purchase my car with the head tooken off the car and in the turnk, and now i have my car all back together, i dont know where the kick down cable goes.. so if any one could snap a pic of there automatic it would be great.. btw.. looking for where the...

here's a couple of shots of what ive been doing lately on my 88. kinda like this one.. tring to decide weather or not i can make this into a clean install.. my friend thinks there is some could tray that i could buy.. :scratch: i currently dont have a drill bit big enough to do...

alright , well im not sure what my car's problem is, but i want to get some feed back .. my car wont start when the throttle is completly closed, witht he throttle linkage off. i would think the car should run with the throttle completly closed... all my other cars do... and my i hook up...

for some reason when i have my car idling. with no afm and no maft pro hooked up she idles fine, well since i dont have a throttle linkage, i have to prop the throttle plate open with a thick zip tie to keep her running. i hooked up the maft pro and she starts to idle funny like rev, drop...

(also posted at SF, same post) well today i finally got to hear my beast fire up, i had to adjust the cps, it was about 1/4 turn off i aligned the wrong mark when i put it all back together after the hg'.. had to plug up a couple of vacume lines that go into the arcodian hose.. just...

well my question is can you start a motor with no afm and a ecu that has been shipped and unplugged from a car for awhile? i got what seemed like a sputter but didn't continue to fire, so could it be the injector clips are on wrong or the cps being out of tune?

hi, i have an 88 usdm sup, and im installing an jdm 89+ gte motor. my question is, can i re-use the water temp sensors for the ecu and stuff so long i re-use and solder in the connector/ change the connector using apin tool.. reason for solder is the wire insulation is cracked near the...