Search results

anyone think this might be too laggy? my setup includes... 24x12x4 IC, 2.75" pipes, q45tb, 780 injs. a1000 pump, built motor, +1mm os valves...etc etc

i've always preferred the car wingless but i've been thinking it may need something back there. so im asking for your guys opinion... thanks -emp.

want to see how it looks on a stock body, anyone?

from TristateTuners.com forum... Help me represent...

ok kinda searched but didnt quite help. My headlights both go up, only passenger side goes down. Changed the motor, nothing. Changed the relay, nothing.... any ideas?

well since the first one wasnt too good, mainly because 80 percent of the people who showed didnt have their cars...and now from wat i know most are recuperating, right now my status is...waiting on cams and a tune but i'll be able to baby the car if necessary. I need suggestions on location...

alright well to whoever knows who i am, this is what i've been upto since November, many trials and tribulations but either way i'd like to share. Not really big on "build threads" but since im bored and i did take pics,not as many as i'd wanted, so i will post and it began with this...

i got some regrinds from SIP but the base circle is smaller so i cant use toyota shims. I dun wanna use custom shims since it will need to be thicker and have a bigger risk of flying out. Question is what have you guys done? I'm not sure if i should get lash caps and if so wat size should i...

Please post all pics and vids here of englishtown 2009. I had a blast it was nice meeting everyone, even though i was damn tired after that long drive back home, seeing how i didnt get much sleep the night before. I didnt take many, i always do that...i get distracted too easily...

cant seem to find out wat the size of the banjo bolt for the power steering line feed line is. Does anyone? i would just order one from DM but i need to get the line installed this weekend and will be getting it locally. please let me know if you can help... Thanks, -emp.

not sure where i should post this... anyone know where i can find a replacement centercap for racing hart m5 18" wheels?

ok so i've been trying to get these done for the longest and i've been asked many times when will it be done and so here it is... Its not tighten down nor properly installed since i JUST got this done. Its not real CF since it'd be a bitch to do it that way but its cf pattern vinyl and i...

Well here we go again. Its part 4...first 3 have been pretty successful meets and hopefully this one will be even better. Location is tough, its been at fairmount park the first 3 times so I'm thinking we should continue this tradition, always entertaining, but if you have Any suggestions...

how good are cometic MHGs for higher boost/HP 7m's? maybe 600-700rwhp? Maybe this has been covered before i haven't found anything. I might be asking this the wrong way but any information that might help would be greatly appreciated. thanks, -emp.

and maybe some sneak peak into my build which I would share but i like to keep shit to myself. Anyway i started to do some powder coating for myself and anyone else who wants things done for cheap ;) I start out by removing the paint and dirt. Nasty PS Reservoir. One in chrome One in...

So my buddy has a datsun 260z and we're going to swap over my old 7m into it, should be a fun ride, the car weighs nothing. So i wanted to ask the people (or person ARZ?) who have done this a few questions while we prepare the chassis and solve the rust issue which is 2 known spots. My first...

im looking at completing my fuel system and i've been thinking about using these hoses instead of the usual AN SS hoses. Anyone here have experience with these? suppose to be rated at 250 PSI so it should be good but i'd like to make sure. I would also need to use the twist lok/push lok type...

Anyone using these with their AEM? just received mine and just wondering what you guys think about them, i won't be able to try mine out for a while and if it turns out to be good i might order a couple more.

there's a burgundy scraped/junked pre 89 mk3 in the beginning of bones, you can see it for about a second when the 2 guys are at the junk yard...damn i need DVR and damn hulu doesnt have that episode anymore. its called The Skull in the Sculpture. Anyone else watch that episode?

not sure if this is the right section so if not please move. So i plan on running a plastic 16gal fuel cell from summit, already have it along with the hardware. Just have a few questions for you guys to make sure everything is right. First does it need to be mounted in the exact middle? i...