Search results

I decided to try out the Rebic LC. So I installed it and had my S-AFR disabled. Everything seemed to be fine. With my mods, I had the dial set at 3, A/F ~11:1, boost ~11.5psi, 93 octane (first attachment). Felt great and everything looked good. That was getting on the interstate. Five...

What would be the benefit, or not, to running an Rebic LC and an AFM scalar? And if a benefit; How should it be wired? AFM > scalar > LC > ECU AFM > LC > scalar > ECU

I am trying to confirm my igniter is good/bad. One test is not passing every part, the power transistor check. I have tried two igniters and both return the same results. (d) & (e) which trigger coils 2&5, pass as described. (f) - (h) trigger coils 1&6, fail (i) - (k) trigger coils 3&4...

What kind of glue is used for attaching emblems on the body of the car? I was washing my girlfriend's Regal, the sponge caught part of the 'l' and tore it off. It is some kind of black tacky stuff.

12psi, conservative ~11.5 a/f and no clutch slip. Just wanted to share :) SAFR settings RPM - Gain 3200 [-1] 3500 [-2] 3800 [-5] 4100 [-6] 4400 [-7] 4750 [-7] 5050 [-7] 5350 [-6] 5650 [-6] 5950 [-4] 6250 [-4] Now, to get to work on my long awaited, 'have/waiting' mods.

Well I'm finally out of the dark ages; I got a cell phone. I created this post with my phone. Aint I smart ;)

Pink Panther > Deleted Scenes > Clouseau Hangs on Back of Car. '90 Burgundy turbo. It is a beautiful one too.

I have a cracked egr valve. I would need to get a California egr valve. It has a temp sensor in it my ecu is looking for. What are the pro’s and con’s of removing it. • I think I remember reading that it helps improve fuel efficiency, lowers combustion temperatures and is environmentally...

After further investigation the 9473PT is NOT an MLS. In that light, I will be going with a Cometic. Sorry for any confusion I may have caused. I'm planning to go with this FelPro metal head gasket, provided they don't have to shave to much off the head. Looks like I may be the first here...

GearCalc freeware http://locost7.info/gearcalc.php cool little program: final gear ratio for lsd is: 3.73 it has built in parameters for R154 and W58

When I check my timing, with the diag block jumpered, the mark jumps around 10° erratically. It has, about, a 6° swing window, maybe 5°, it's not marked in single increments. When I remove the jumper, it advances to ~12° but with the same amount of swing, jumping, fluctuating, bouncing,... In...

Who's white 89-90 MKIII on 60 Minutes tonight?

i know several people have this wideband now. post some logs for examples. .zto is an approved file extension for posting and in the software you can split out sections to keep it under 1.91mb. and if you need larger, you can zip it. here's a couple of mine First Dyno...

anybody use this software to analyze their datalogs? opinions? it's compatible with zeitronix logs. • The Power Graph generates power and torque curves from sections of your data log. • The purpose of the Speed Graph is to display in-gear acceleration times based on the data used to...

does anyone with any datalogging software experience this? what could be the causes? noise, timing, detonation, slipping clutch,... rpm is the blue line

Wow, You know it's gone well if no one notices. I didn't. Great Job :bigthumb:

slipidy-do-da I have a new stock clutch, pressure plate, tob and resurfaced flywheel. But I have finally tuned my safr and with all my cumulative mods, I appear to be exceeding the capabilities of my clutch. I am slipping badly, as you can see in the graph, and this weekend, while out taking...

okay, for some reason i can't figure out how they mean to adjust this. • do i increase the time to allow fuel longer or • do i decrease the time to add fuel sooner here are all the explanations i can find about this adjustment: the last one includes the example table below:

It's for using a PDA, to log the Zeitronix ZT-2 Wideband, instead of having to haul out the notebook every time you want to take logs. http://www.pocketlogger.com/index.php?pid=plzt The logs can be viewed on a pc with the PLViewer. It must be the PLViewer for PocketLOGGER ZT files. Make...

okay, for some reason i can't figure out how they mean to adjust this. • do i increase the time to allow fuel longer or • do i decrease the time to add fuel sooner here are all the explanations i can find about this adjustment: the last one includes the example table below: