Search results

Got the new turbo installed and running friday. It's a 70mm compressor wheel and a .69ex, the same turbo "hottscennessey" is using so this will be an interesting comparison. So far it puts the old ct to shame, my old turbo did 407rwtq and 350rwhp. This turbo spools up at about 4200rpm full...

been using my vpc for a while now had a question for you guys. On the afc the only numbers that change are rpm, the throttle and karmen dont. Karmen stays at 3 all the time throttle stays at 0 is this normal?

just put the sup on the dyno mods include .20 overbore wiseco all arp cometic gasket 550cc injectors vpc no afc yet full turbo back 3" precision front mount blitz blow off greddy ebc air fuel went sub 10s after 5600rpm so more tuning needed before that rock steady 11:1 end result 325whp and...

anyone know what the ignition timing is at full throttle? any data logs?

head was machined using it on a rebuilt motor with forged pistons etc. will be boosting this setup hard. While lapping the head i found 2 small cracks they seem to start from the edge of the exhaust valve seat and stop in the surface of the head the cracks are small and do not make it into a...

so there is a local guy here with stacked gaskets to get the compression he wanted. he has a felpro on the block a steel shim and then another felpro hes been running this way for a year at 16psi on a 57trim pump fuel just bumped into him again and thought it was pretty funny :biglaugh:

So after a fresh rebuild done by me with all machine work done by a local machine shop. I decided to go with the wiseco pistons set proper piston to wall clearence and set my sights on 600-650rwhp. Specs on motor are cometic gasket custom, all arp hardware, micropolished crank, all parts...

what we've been waiting for it's a new sce gasket for the 7m this is a copper gasket from sce the oring is built in spoke with kaleb and he never received a stock head and block to work with but they can make it for our cars. One hang up is without a motor they cant put the built in rubber...

anyone have pics of the hks stopper gasket? Is there a ring around each cyl like a stock style gasket or does it look like a bead style like cometic

For everyone looking to improve fueling buschurracing now has modified walbro pumps capable of supplying enough fuel for over 600whp from a single drop in check the site for info

was rebuilding my tranny the other day was wondering if their was a market to rebuild the r154's if so let me know if u are interested in this would include cleaning new synchro's and bearings would require u to let me know specific problems with your tranny