Recent content by pattywaggon

  1. P

    Archive: MAFT Pro Questions

    I hooked up my maft pro and am trying to run on speed density i have the IAT sensor and gm 3bar sensor hooked up everything is fine, they are all getting signals and such that seem correct but i start the car and it will run for a split second and then die i have all the setting in the...
  2. P

    Do I need the Idle speed control valve?

    i think i may keep it, the cold start would make a big deal and ac i dont know if im keeping ac but its all intact and working so i may just leave it as is. Thanks though, i know it works off the coolant temp to raise and drop idle
  3. P

    1990 7mgte ECU not being recognized by car and car wont start

    it was the ignition wire i ran a few tests and realized i didnt have ignition power, the main relay was fine odly the last time i fixed it was by removing and reinserting a few fuses the 7.5 fuse was fine, but was heavily corroded swapped out with a new fuse and all is well. Thanks for the...
  4. P

    Do I need the Idle speed control valve?

    Im going to fabricate a ffim intake manifold for my supra i bought a stock intake manifold and cut the runner already and made a tb plate for the stock tb to bolt on to, i have the plentum set up as a 3" tube i am wondering if i need the iscv setup or can i just get away with using a...
  5. P

    1990 7mgte ECU not being recognized by car and car wont start

    This happend to me a few weeks back when i first got the car its a 1990 7mgte M/T and the car randomly doesnt want to start when the key is in the "on" position all the dash lights blink besides the CEL light which means the car isnt getting signal from the ecu i checked that the dash...
  6. P

    Car is completely dead, no lights at all or crank randomly

    fixed it this mourning i followed the positive wire off the batter under the fuse box. its blue with a black cover or shrink wrap ect and turned into 2 white wires that feed into the alternator fuse it was dry rotted and freyed apart i litterally just grabbed it and gave it a little tug...
  7. P

    Car is completely dead, no lights at all or crank randomly

    yeh 12.56 volts the clampts are tights and clean
  8. P

    Car is completely dead, no lights at all or crank randomly

    no fuses are getting power i grounded the battery using jumper cable to the flock and frame just to see if the battery has a faulty ground any sugggestions
  9. P

    Car is completely dead, no lights at all or crank randomly

    the fuses are fine, just looked at them with a flashlight there are aboslutely no lights, or relays or anyting going off im going to check the battery with a multi meter I only drove for like 5 mins and had the car idle for a minute and then parked it no i get in and there isnt signal of any...
  10. P

    Car is completely dead, no lights at all or crank randomly

    I just got done driving my car around the block, has been running fine ever since i bought it about a month ago, The car randomly just went blank when i turned it off and took the key out, it doesnt know the door is open, or key n ignition, no horn its as if my battery isnt there, I...