Recent content by oldskool-nick

My memory is pretty bad, but is this the same John from back in the day? Back when MDSupras.com existed and whatnot? If so, that is awesome. I'm still in the area, I don't have a Supra at the moment though, but hopefully sometime soon.

I already have sm stickers, but I just got a bunch of custom stickers made, and this guy rocks. I just thought I would offer a little positive feedback :)

werd..............map sensor FTW Glad it all worked out!

http://www.supramania.com/forums/showpost.php?p=322153&postcount=2

You would need the 7m-ge ecu and wiring harness too. But yeah, the motor mounts will bolt up. (assuming it is a pre-89 engine). Just make sure you get all of the 7m-ge electronics (ignitor, distributor, etc).

Ahhh, well alrighty then. Thanks for the super-fast response! Looks like I'll be keeping both of them

Maybe this is a stupid question, but I haven't been able to figure it out. On the 7m-ge there are 2 diaphrams that don't seem to serve a necessary purpse. The first is on the intake manifold: (sorry the pics suck) It looks like it runs off a vacuum and when it opens it blocks off half...

Quick Update: I talked to Jeff at TurboEast today, and it turns out I was a little off on the pricing, which is a good thing. :) The cost will be about $35 per pull, or $50 for 3 pulls, IF WE HAVE AT LEAST 10 PEOPLE. As I said before, this is all tentative, but if there is enough interest...

Awesome! I'm just trying to gauge interest right now, before I set something official up.

I'm thinking about putting together a dyno day before winter. I was over at TurboEast in Mount Airy today and they should have their dyno installed in a couple weeks. I can get a decent deal, and we can do it during the week or on saturday or sunday, whatever works best. It doesn't have to...

I'm about 90% sure I'll be there, and my exhaust still isn't done so you'll hear me coming from miles away. I know quite a few people from mdsupras said they will be able to make it, so hopefully everyone will!

Yup, it is! I havn't been updating this thread like I should, but here are the most recent pics I have: MAFT-Pro installation: I made a metal plate for the MAP sensor and boost solenoid: My IAT sensor: Beginning the wiring: Completed wiring: (It's in the glovebox now)...

There is a hard pipe that runs next to the "3000" pipe, at the end of that pipe closest to the intake manifold is where one end attaches. Then the other end attatches to a hard pipe that is labeled "25706" in the diagram, on the nipple that doen't show any lines going to it. Sorry, if thats...

I'm pretty sure it goes under the fuel rail, so that the nipple comes up between the fuel rail and valve cover edit> here you go: http://www.supramania.com/forums/showthread.php?t=23064