Recent content by ochocinco5k

  1. O

    FoxBody Drift Build

    New Corbeau Seats. Hope the stock seatbelts play ball. Took the rear out to install FRPP 4.10 Gears Setting the bearing preload(turning torque) was easy enough after i fucked the first one by crushing it too much.After you get rid of the up and down play, thats when you start...
  2. O

    FoxBody Drift Build

    Got back from Afghanistan, one of the first things I did was to buy my PSG's 1992 Fox Body Mustang. It was a steal, especially for a Southern, mostly rust free, car. Got to business started tearing it apart. Disconnected the battery, set it down on the floor, and noticed this little lady...
  3. O

    Yhatzee89's Second-Hand Supra Build Thread

    Yes
  4. O

    Yhatzee89's Second-Hand Supra Build Thread

    YOu wouldnt happen to still have that HKS boost guage ? Condition ?
  5. O

    Solid Aluminium or Ronnie K Bushings ?

    Lord Digital : I pressume your talking about ones like BIC's subframe spacers ? I was also entertaining the idea of the Ronnie K bushings and these spacers in the back.
  6. O

    Solid Aluminium or Ronnie K Bushings ?

    I have been trying to decide between a solid subframe set in development, and 95 Rockwell hardness bushings from Ronnie K. I plan on making my Supra really handling focused so I am not concerned with road/diff noise. Also plan on heavily reinforcing the subframe as well.
  7. O

    1987 7MGTE / Drift Build

    Well I have purchased, but not installed, a set of Beech arms. Quality is second to none and they're made in the US. And contact THMotorsports for Stance coilovers, they're stiffer, and certainly cheaper then TIEN's. Heres a comparision thread between Stance and TIEN...
  8. O

    1987 7MGTE / Drift Build

    Thought the sound deadening was easier to remove than that. All i used was an iPod, a hammer and a screwdriver. Got a pretty great percentage out, even in the spare tire area. What suspension mods are you going to do ?
  9. O

    Solid subframe bushings

    Another bump, interested in these, PM sent.
  10. O

    Going to a Single, EMS ?

    Yea, you guys are right, i should at least reach the limit of the twins before I upgrade. I guess its the shiny new thing syndrome.
  11. O

    Going to a Single, EMS ?

    If I switch to the 550cc injectors in the USDm model would i have to switch ECM's ? I thought they were different impedance. By what rpm are they twins fully spooled by ?
  12. O

    Going to a Single, EMS ?

    With the EFR series turbo, it should spool faster than the twins, and be more reliable than rebuilt twins, I also want to get rid of the exhaust bypass system. It should also give more space, or not having to knock the firewall a couple of inches to fit the twins. another great thing for the...
  13. O

    Going to a Single, EMS ?

    Just wondering about the 2JZ swap, if I ditch the factory twins, and upgrade to a Borg Warner 6258, which is good for 300 to 450hp, would I need to upgrade the fuel management ? I'm looking to make about 350hp, and i figured the stock computer would be ok, as long as boost and fuel pressure were...
  14. O

    1jz, taking off the twins with the rear turbo touching the firewall

    Hey since your ditching the twin's, I had a quick question. Is it neccesary to switch to aftermarket fuel management when switching to a single setup ? I was planning on running a EFR 6258, which is advertised to support up to 440hp, but I'm shooting for around 350 hp. I was just wondering if...
  15. O

    The Small Questions Thread

    I plan on putting a 2JZ into a MKIII supra, if I upgrade my turbo to a single, designed for 300 - 450 hp, yet still use the factory injectors and fuel pressure, would I have to upgrade the ECM ? I'm just trying to get the reliablility of the stock computer, with the simplicity of the single turbo.
See more
Top Bottom