I dont remenber exactly but is a little less than 2 inches, is not worthy to use a slip yoke, it has to be very long so it doesnt hit the threaded part were the locking nut goes and you will only have less than 2 inches of support ... the chevy yoke fits, but the rear seal is larger so you will...
I installed the driveshaft but had some troubles, first ordered the gt500 DS and the yoke is a lot bigger than the stock ar5, so i needed to make some adapters
this black spacer came with the DS as was useful for making a model for the adapter
i made a spacer from 3/8" because the DS was...
Uhhhh Fuck it ,why I didn't found it before....05-10 Mustang drive shaft can be used on the trans yoke and on the rear end.....http://www.dennysdriveshaft.com/c1133_driveshafts_mustang_2005_to_2014.html.
There is.... The Colorado transmission has it but I read somewhere long time ago that the solstice had a heat treatment or something that made it better, and the hummer has carbon fiber syncros, but is something I remotely remember, and using the Colorado trans you can use a regular slip yoke...
And found this adapterhttp://www.driftmotion.com/Solstice-Sky-AR5-Transmission-Flange-Adapter-p/dm3119.htm There is a drag race event this weekend and will test the drive shaft with the Volvo yoke , and will let you know
Mánaged to drive my ar5 with the stock output yoke but didn't give me the security feeling of a slip yoke, removed it and it uses a chevrolet 27 spline but the Chevy slip yoke is 38mm and the seal is for a 40mm slip, so either you change the rear seal or you find a yoke with that width don't...
Is this the link? http://www.factoryoemparts.com/sky-solstice-clutch-slave-cylinder-24234308-24234308 is the same as my non turbo trans, are you using mallet bellhousing or the novak adapter? I couldnt install the slave cylibder with my novak :(
https://scontent-a-mia.xx.fbcdn.net/hphotos-xap1/t31.0-8/10497347_10154449588810157_2726044531886339315_o.jpg
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-xpf1/t31.0-8/10560284_10154449588100157_1306971599409205414_o.jpg
I coul not upload them from my phone sorry
hope it helps, i search for the toyota 4x4 driveshaft and i thought it would be a little dangerous mostly because of centering everything, but i luckily found a volvo s70 driveshat and it fits the ar5 rear yoke it looks like this...
limequat, how´s your ar5 holding? how much hp/tq on your car?
I just bought a 2007 solstice trans and im planing on installing it on my turbo lq4 firebird... i know it has nothing to do with supras but its the only thread on the internet where people are using that trans... i just broke my...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.