Search results

if anyone is still having doubts, my ar5 is still holding great with an 600whp lq4 and 3200+pounds car

I dont remenber exactly but is a little less than 2 inches, is not worthy to use a slip yoke, it has to be very long so it doesnt hit the threaded part were the locking nut goes and you will only have less than 2 inches of support ... the chevy yoke fits, but the rear seal is larger so you will...

I installed the driveshaft but had some troubles, first ordered the gt500 DS and the yoke is a lot bigger than the stock ar5, so i needed to make some adapters this black spacer came with the DS as was useful for making a model for the adapter i made a spacer from 3/8" because the DS was...

Uhhhh Fuck it ,why I didn't found it before....05-10 Mustang drive shaft can be used on the trans yoke and on the rear end.....http://www.dennysdriveshaft.com/c1133_driveshafts_mustang_2005_to_2014.html.

There is.... The Colorado transmission has it but I read somewhere long time ago that the solstice had a heat treatment or something that made it better, and the hummer has carbon fiber syncros, but is something I remotely remember, and using the Colorado trans you can use a regular slip yoke...

And found this adapterhttp://www.driftmotion.com/Solstice-Sky-AR5-Transmission-Flange-Adapter-p/dm3119.htm There is a drag race event this weekend and will test the drive shaft with the Volvo yoke , and will let you know

Mánaged to drive my ar5 with the stock output yoke but didn't give me the security feeling of a slip yoke, removed it and it uses a chevrolet 27 spline but the Chevy slip yoke is 38mm and the seal is for a 40mm slip, so either you change the rear seal or you find a yoke with that width don't...

Is this the link? http://www.factoryoemparts.com/sky-solstice-clutch-slave-cylinder-24234308-24234308 is the same as my non turbo trans, are you using mallet bellhousing or the novak adapter? I couldnt install the slave cylibder with my novak :(

i need the stock solstice shifter with the mount to the trans anybody willing to sell one?

https://scontent-a-mia.xx.fbcdn.net/hphotos-xap1/t31.0-8/10497347_10154449588810157_2726044531886339315_o.jpg https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-xpf1/t31.0-8/10560284_10154449588100157_1306971599409205414_o.jpg I coul not upload them from my phone sorry

hope it helps, i search for the toyota 4x4 driveshaft and i thought it would be a little dangerous mostly because of centering everything, but i luckily found a volvo s70 driveshat and it fits the ar5 rear yoke it looks like this...

limequat , by any chance, do you have a picture of your driveshaft? does it has a slip yoke?

jajajajaajaa for your videos i suspected you were like 700whp/500 lb/ft well ill let you know if it holds right... i hope it does

limequat, how´s your ar5 holding? how much hp/tq on your car? I just bought a 2007 solstice trans and im planing on installing it on my turbo lq4 firebird... i know it has nothing to do with supras but its the only thread on the internet where people are using that trans... i just broke my...