master power t-70

[suprafanatic]

On a 2.0L engine is not restrictive at all, but in a 3.0L 6 cil, i think it is, unfortunalty i did it and the engine didn`t last long to shot another video. Too high egts

So you think the .68 a/r housing is to restrictive? Im still unsure which im going to go with at this point.

 

[a_sesshoumaru]

So you think the .68 a/r housing is to restrictive? Im still unsure which im going to go with at this point.

Depends on how many psi you want to boost. Any one has a video with a 0.96 housing? i would like to see the spool of that.

 

[suprafanatic]

i'll be running around 20 pounds.. just looked at the MP site they have a .81 housing for the T70 and the T76

 

[Moy]

i'll be running around 20 pounds.. just looked at the MP site they have a .81 housing for the T70 and the T76

Yeah but is it possible to get it with a divided housing, or swap a divided housing of similar size onto the turbo in place of the one that came on it? (I don't know much about turbos, forgive my ignorance)

 

[1wickedA70]

I have a friend who is running a Master Power (real) T70 on his 1jz, with Emanage.

It pulls hard just past 3500-3700 all the way to redline.

Dyno is comming in around 500rwhp.

what size A/R?

 

[ModularTurbo]

.81 a/r housing has never been made available. It wasn't suppose to be in our catalog, they put it in thinking that it was coming out soon but they never made it.

 

[turbulance_cressida]

so my question is a master power t-70 with intro of 69.1 and exit of 91 with a .68 housing good for a 1jz?

 

[bis_1315m]

how would the t76 performance wise compare to the t70 as far as spool and horsepower capability.

and has anyone tried the gt35r if so how much power did you make and how was spool up.

thanks

 

[ModularTurbo]

The 76 would definetly make more power, but would spool 500 to 800 slower.

 

[kamikazemkiii]

If the MP T61 and T70's have the .68a/r how is the spool different?

 

[ModularTurbo]

smaller compressor equals faster spool up and less peak power.

I have sold a bunch of T61's here maybe someone can chime in with a dyno graph