Alright guys I need some opinions. My motor has about 1400 miles and its all forged internals bored 40 over and such. I was driving it to an amusement park and i guess i was running low on oil but i didnt notice. On the way back though I guess i completely had no oil well enough to run so the...
Im sure that others have asked this question I was just wondering if someone can poin tme in the right direction as to where i may find this information. Im lookin to find out how to eliminate the piping the runs over the valve covers that the pcv system and vacuum lines are attached to and also...
hey guys i need some advice i need to replace som studs on my drivers front wheel. its a 1990 supra turbo. I have taken out my rotor and brake assembly but the studs seem to be in a sealed unit?? :3d_frown: is it possible to replace individual studs or do i have to replace that unit??
hey guys i have a few questions for everyone. First I was wondering what hose connects to the bottom stem of the throttle body? My next question is there is a nipple on the lower intake manifold closest to the alternator , im just wonder what hose goes there and where does the other side go...
I need help on installing the aeromotive afpr kit, i never did this before so bare with me.. i want to know if im going to have to buy my own fittings for the fuel rail or was it suppose to be part of the kit... im confused if anyone can explain how everything is setup or better yet has pictures...
I have a question the way my sp67 is put together if i was to put the turbo in place the compressor outlet faces towards the intake manifold... now is this something that I can fix myself , is there a way to maybe turn the housing? Sound performance knew the turbo was for a Supra so what do i do...
I just wanted to ask who was running koni yellow adjustable and how firm they went on the setup and how it drives on the street thanks i just want a rough idea on how firm i should set them. thanks
alright i wanted to know from those who have completely turned there engine bay upside down, what can i eliminate to clean up the engine bay so that everything is easily accessible and easier to install as of right now my motor is out .. i plan to eliminate the egr system and was wondering wat...
Alright I really need help. I want a motec standalone system but as of right now thats definitely not happening for more than one reason. So i was wondering what would be my best solution until i can get a motec standalone system. Is there a piggyback unit that will allow me to eliminate the maf...
Alright i was wondering if anyone uses the greddy profec b spec II ...i believe i had read somewhere that it wasnt worth it i was wondering if it was and if not what is a good boost controller to get ? thanks
hey i am lookin for a machine shop that has done 7m motors before and that possibly has a torque plate , i have no otha choice since no one has a torque plate for me to borrow so i must ship out my motor to a shop that does...if u know of a shop please let me know thanks
hi yea i was wonderin if anyone can give me advice on how to choose the proper waste as far as size and also spring tension i believe because i guess theres an option on wat psi the spring will be at idk....please shed some light on this thanks
I'm buying an SP67 turbo and i dont know what compressor cover to get...is there advantages and disadvantages to certain ones or is the "H" housing fine (4" inlet and 3" outlet to the intercooler) help is appreciated
i just wanted to know wat ppl felt is a better turbo i dont know if i should get either a t66 turbonetics turbo or a sp67 turbo...my goal is to be able to have a car capable of doin 10's even 9's ...i dont know if these r the turbos to do it with ...i dont want to jump into a turbo that i wont...
I really need a torque plate for the 7m anyone have any ideas of where i can get one or borrow one or even possibly make one i really want to use a torque play before i do the block...
hey i was wondering if someone can provide me with the specs on the 7mgte ...things such as rod diameter, length, wrist pin diameter, etc. im trying to get some rods done and i need to provide the company with the specs thanks
I wanted to ask if i can eliminate all emission related components without affecting the cars performance and also how to go about doin it if theres something i have to do besides taking it all out such as maybe cappin somethin off ...also I was wonderin how much power i can make safely while...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.