Search results

Ok so I've got the Supra no start (relay) problem, opted to install a push button start, wired +12V (Batt.) to push button, out starter relay, problem is when button is pushed starter selenoid just spins no engagement to the flywheel at all. Any suggestions?

Ok so I changed out my wiper motor in my 88, lo and behold I get it back together and my wipers are off kilter, in the off position my blades are in the vertical position. I tried changing the blades on the studs but they don't move at all. Right now they work but like I said in the off...

All, What would cause a noise similar to a failing power steering pump (whiring noise that incr/decr with throttle) only the sound is coming from the cam gear area or just below it.

Anyone from the Jackson/Hattiesburg, MS area going?

All, Here's my problem installed a set of H4 Hi/Low plug and play HIDS. When turned on to headlight position(low beam)nothing. When moved forward(Hi beam) HIDS come on with HID hi beam on. Move it back to low beam HIDS are off. If I ground one of the terminals on the plug that plugs into the...

Have a 1J with a stinger, car has had the cold start issue but now it will not idle on it's own. As long as you hold the pedal down in high Rpms it runs release the pedal and it dies out. What should I check first?

My singled 1j fuel pressure drops when I turn the boost up above say 13.5lbs. I've got a turbonetics T-60, 540 injectors, Walbro pump, aeromotive FPR, Stinger ECU. The stock lines are OK. The line from the tank goes to some apparatus on the side of the block just behind and below the oil filter...

Anyone have hi/low beam HIDS installed in your MKIII that won't switch into hi beam or vice versa? Is it more likely bulb problems or controller box failure?

My factory alarm goes off sometimes by itself, and once it went off and the horn constantly sounding, it did turn off when I turn the key in the driver door. What will happen if I unplug the alarm box under the dash?

I was looking thru the Ebay auctions and came across this!! http://cgi.ebay.com/ebaymotors/1986-TOYOTA-SUPRA-CUSTOM-CONVERTIBLE_W0QQitemZ140254041938QQihZ004QQcategoryZ6447QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Will they fit, moreso will the elect. plug mate up?

All, Went to try to Dyno my car for a second time, the last failed because an inoperative fuel system. This time after fixing the fuel and adding a Stinger standalone and flashing a base map to get it going, I find that my #3 and 4 cylinders are not firing at all. I'm also building about 8 psi...

Anyone on the MS Gulf coast willing to help me with my problem child 1JZ in Hattiesburg?

Anyone in or near Mississippi got 1JZ mechanical skillz?

My Sup is finally back together took some mo pics, car was dirty though.

I installed a 1j and added a single turbonetics t-60, with a avcr, neo and 550 injectors. When I first got it back it was running rich and fouling badly and had a real bad stumble/hesitaion when i applied medium to heavy throttle but pretty much only in first gear. I took it to the dyno...

OK, Got my Sup back last month. Got a few pics of it going back together. Still got put up some whole body shots. More to follow.

Are there any folks out there from the West Alabama, Mississippi, Louisiana, and west Texas areas interested in getting together for a meet or something?

Anyone got or can get a hold of a Tein EFDC user manual?

Got my car back from the shop today. Drove it an hour and a half home, without any problems didn't really romp on it. Parked it unloaded some stuff, got back in it later and cranked it ran it a few min. and heard a slapping noise under the hood. lo and behold the front portion of the...