Search results

I see this is a touchy subject for a lot. some say use the double feed to drain formula some say use a tripple feed to drain formula. So If I have a DBB turbo with a 1MM hole for oil feed, why do I need a -10 or more drain if not a whole lot of oil is going in? I only ask b/c my -10An is...

I'm in a middle of a supra project for one of my customers. The car is complete but we can't seem to get it running right and have spent several weeks trouble shooting some of the issues. Basically the car has a real lean condition at idle and driving. car is done up from the bottom up...

Started a rebuild on my R154 transmission. Have some of it apart but still have a long way to go. Need some special Tools to take some of the bearings out. Harbor Freight is dry on Shop presses right now so the project is on hold :biglaugh:

I posted in the Wanted section but If someone in NC has 2 7MGTE bare blocks with main caps, I need em. Just block with no rods/cranks. I need the front plate.

I want to wire the MAFT Pro with the UEGO and I think the wire that needs to be tapped in on the Uego is White. Can anyone confirm this?

went out for a spin over the weekend. nothing crazy. Oh, don't mind the slipping clutch :( http://videos.suprafiles.com/player.aspx?fileid=F20E9EE1-D426-4B87-AADF-CCD941FC8046

Mike and Brent are coming from charlotte and gonna hookup at Jeffs place in pittsboro. Me and Abdoul were gonna head out that way. 12 noon or so. let me know if you guys wanna hoookup.

Few pulls we did back in the day. http://smvideos.suprapics.com/index.php?fileid=fa92de2bfc842051b332e2fe5479cacb

I have been a part of the supra community for a number of years. It took a lot of work from a whole bunch of members to bring us where we are today. Before we had Internet forums, we had a not so fancy mailing list that would bring us all together and we can post our thoughts or have others...

Got my engine togather but my T04 is bleeding oil everywhere. I can send it to PT out west but just wondering if you guys know any good shops in the south that can do the work.. Thanks.

Here's the deal. I sent a note to the groupbuy email in supramania but didnot get a reply from anyone about getting approval for getting a Group deal going. I need Minimum of 5 people to do $200 10 People to do $190 20 People to do $180. This is a steel shaft, not alluminum. fully...

My struts are just about finished... Wait, They are finished. I have eibach springs. any of you guys running stock toyota struts or you are running aftermarket stuff? Someone said Tokico's blow out too quick. I Ran my stock struts stiff fulltime with the HKS Tems controller :hs: . they...

Some MKIV guys sent me an invitation to a supra meet in Charlotte next month. There's a Sticky thread on supraforums. My car is out of the body shop and I'm starting to put the pieces back togather. I think I have enough time to build my engine. For the guys who met me few weeks ago, I had a...

I got a Flywheel from a Junkyard which is suppose to be for a 7M and on the back of the flywheel it says S14 KA. but I'll be damn, it bolts right on to the 7M. Anyone know this to be True? or is it the junkyard marking it wrong?

Thank God for DA Sanders :biglaugh: Need to widen the fenders just a little bit so the wheels can fit. I already did the baseball bat job on the front left, Need to clean it up a bit with fibreglass. Still got some ways to go removing the glass and rear lights/moldings/spoiler and both...

Dear supra members, Some of you know I'm involved in rebuilding quiet a few 7Mz for supra/cressida owners. Up to now, I have yet to have one of my engines fail. After about 60 or so 7M rebuilds, today I have a customer bring a car back to me. So here's the story, this is a 92 Cressida I...

I'm in the market a 4 door car and have narrowed down my choices to these 4. These would be about 1 or 2 years old, The market right now is crazy and I'm not about to loose $20K buying one of these new.. Lexus LS430 Its liquid soft, I think it maybe too old for me, Lot of old people...

I'm cooking up an idea about going total sleeper on the cressida using the stock 2.5inch Catback mated to the Straight 3inch downpipe going to the turbo elbow with the internal wastegate welded shut.. I drill a hole pre turbo on the manifold, and run a pipe to a external wastegate from there...

I'm looking for some Non Ghetto fender flares or some wide fenders for the front for my MKIII. I see the group deal thats trying to go on on Supraforums but I don't think thats going anywhere. I'm thinking I may have to take the fenders off and widen them up myself but before I go that far...

I'm not sure about you guys but I sware at times I thought I had thorns in my elbows digging holes in my arm rests. Well the Supra and Cressida both are tore. So I had a local fabric shop refinish them for me. He took the old one off, copied it and then put the new one on the lid. $38...