Search results

Alright thanks i will do that.

I need some direction on this one guys. I recently had my t61 masterpower turbo rebuilt due to oil seal failure and now I have everthing back together and on the road. While I had the turbo off I switched out my HKS 50mm knock off with an old 38mm deltagate. Now I can't get past 6psi and I'm...

The leak must be getting worse. When I was on the way home tonight I swear I can actually hear the wastegate leaking and boost will eventually hit 5 or 6 psi but only if you floor it. I won't be able to take it off until probably monday but I'll try to get some pics posted when I get it off...

Yes I installed the valve seat between the manifold flange and the wastegate with the protrusion facing toward the wastegate. I think I just got a dud wastegate that finally gave up. Is there anything else I could be overlooking or do I have a bad wastegate? Thanks for everything so far.

I finally got the chance to check the wastegate for leaks. It is definately leaking. It is only leaking a little at idle but it increases to a large leak during revs. I think I'm just going to try out the turbonetics 38mm for a while and eventually upgrade to a tial later. Thanks everyone for...

I haven't changed anything to the car. I installed the turbo, manifold, and wastegate at the same time. I will check the wastegate when I get home tonight. I have let it sit a day and I'm sorry for the delayed response. What do you think about a turbonetics 38mm deltagate for my setup? I still...

XS power told me the spring was for 10 to 11psi when I bought it new. When I first installed it it would boost strong and it would run like 9psi at full boost. Over the last week it will take a little longer to spool and peaks at 6psi. A few of my friends told me they had problems with the hks...

I am currently running a MP61 with a .68 exhaust on a xs power t4 manifold with a 50mm hks knock off. The wastegate is supposed to have a 10psi spring but I can only hit 7psi. I've been told the knock off hks usually leaks so I need to know what wastegate to replace it with. Is it possible to...

Thanks for the info guys.

Can I run the remote filter without a thermostat?

What about using a sandwich plate between the oil filter and housing? Is anyone using a setup like this? What brand remote mount are you using IJ?

I am still running the stock oil filter housing. Where can I put the oil temp sender? Do I have to buy a remote filter kit? If so, what brand is the best and most reliable?

Where is everyone putting the aftermarket oil temp sender on a 7mgte? Do I need to buy a special adapter or does a factory port exsist?

Is anyone running a oil temp gauge on their 7mgte? Where is the best location to put the sender?

Sorry about the slow response, my computer decided to take a dump. Alright, here is an update on my car. Recalibrated the tps, installed new denso o2, and reinstalled emissions parts. The car runs great. Idles a little high still(750rpm), but response is quicker and idle is steady. I still have...

Sorry JDUB, I didin't mean you. You have been very informative and patient. I just don't appreciate it when others chime in with sarcasm instead of advice. I will try recalibrating my tbody this weekend. I only have a digital meter and I have a coworker who has an anilog meter. Thanks for the...

I've heard a couple of different ways to set the tps adjustment, but what is the best way per you jdub? I am a little new to this forum and supras in general, but that doesn't mean I'm unhelpable. You need to learn some pactience with people. Just because some aren't as knowledgable as you...

The the fuel pressure is toyota new, but the csi is old. I'll try that tomorrow morning when it's cold.

Feels alright. How should it feel?

Custom stupid 3 inch turbo back.