Hello all, Im having some issues getting my car started. Im thinking im not getting enough fuel for a good startup. If I pump the gas a little bit the car almost wants to start up. I have FIC 850cc injectors but am running the same numbers as the Stock 1130 map. Crank Inject all is on, fuel pump...
Im having a couple of issues with my 7m and getting it to start and stay running. I got the car to start briefly, it fired up and ran up to about 2k rpms then it stalled out. Is this when the engine start map switches over to the idle map? Now when I try to start the car it just clicks, no...
Hello all. First of all the car has been heavily modifiied. This is not at all stock.
1. The fuel pump has been rewired for the 12v mod. Followed shaeff's tutorial, and re checked all connections to the relay. Removed the stock relay and resistor. Spliced resistor wires together. Made a jumper...
I recently relocated my battery to the trunk, bought some 1 ga welding cable and ran the ground all the way to the front. I plan on grounding to the motor mount shown in the picture. Should i be getting a grounding strap and run that off of the motor mount and to the chassis? And are their any...
Hello everyone, I purchased the C.O.P ignition mod parts from two seperate people. So I was wondering which wire should go where on the clip.
Thanks for your time.
So today a buddy and I measured the clearances for my cams and they were way outta spec. I went through several extra shims that i had from other 7m heads and measured those but with no luck. Only about 2 of the clearances are in spec.
So now the plan is to go shimless. I read a few threads...
Alright so i bought a built 7m shortblock. I was checking everything over to see if everything was the same as what i had been told and to see what condition everything was in. Everything checked out fine. Now when i turned my motor over on the engine stand when i was looking at everything i...
So yea as the title says i pulled my 7m-gte recently well like two weeks ago roughly. And i got some pictures of some of the progress. So i figured id show some pictures. Stay tuned for a build also!
Fairly recently i brought a head to the machine shop to get some prices and to get a feel for the place. So he looked over the head and inspected it. He saw the cam journals and checked if they were within spec. Which unfortunately they were not within spec. And the journals could not be honed...
Does anybody know of any good/reputable machine shops in the midwest? I live in Green Bay and im willing to travel a little bit ( probably one state over ). But I dont know of any good machine shops. Any recommendations?
So i was cruisin the local strip to meet up with other racers and race. And i ended up meeting up with a Scion TC at a light. Well he ended up taking off fairly quick and then i gave it some gas until i builed up boost and let off so he could here the BOV. So then i pulled up next to him and he...
Hey, im having a bit of a difficulty locating all of the bolts needed to take off the front bumper off of an 89. Ive searched around and gathered some information. I know I need to take the blinkers off and the grill pieces. But where are the bolts located for those and the fog lights? Im having...
Hey i have a 89 targa top supra. 7m-gte with intake exhaust and a metal headgasket. Ive been browsing around the forums for a little while now just learning a few things here and there. Glad to be here and i hope to learn more things.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.