Search results

what will be needed for the swap? i have a 90 n/a auto (good running shape, just cant get legal)and have heard the motor will bolt up to the 4 speed in the truck.any good links or tips?

is it possible to remove the hose between the afm and the throttle boby and make an adapter that will put the afm against the throttle body to help reduce space?i dont know if it will even work, just an idea about space

i cleaned under the small cover on the intake and some carbon got into the lower plenum, what is the best way to got it out? take off the entire intake and clean or what??

on an earlier post i stated i took off the plate on the y pipe on intake and knocked the carbon out of it and some fell into the plenum. now when i rev the car up (from idle to 4000)in neutral it smokes like a freight train.is that cause of the carbon that went into the cylinders or what??i...

the hose that comes off the cam cover and goes under the alt. is the one in question. i took it off to remove the camcovers to paint em and the hose was brittle. does it have to or need to be a preformed hose or will a regular hose work? does anyone know what size this hose is? again...

a buddy of mine tried to help me out this morning and set me further back. he broke the bottom bolt off in the thermostat housing!!! :icon_evil . can the housing come off the block or do i have to take the fan ,shroud,and radiator out? it has to be drilled and extracted or even tapped. i have...

ive searched and seen several posts on it but never seen the correct replecement size for them,looked on the tsrm too. also what is better,the standard phillips head, allen head ,or a regular hex head holt?what should you use to replace the rubber washers underneath the bolts?

is there somewhere where i can get a diagram of the fuses on the kick panel?there is no cover and i dont know which is which

do n/a supras have a rev limiteror a fuel cut?if so at what rpm?

im not for sure what they are called ,(inspection covers) there are two on my 90 n/a intale.one on the y pipe and the other on the plenum.well i took them both off to do some deatil work and to see how dirty they were inside and the small on on the y pipe was clogged up with carbon.i scraped and...

when i got the car, the guy told me he had the intake completly ported and had the throttle body replaced with a bigger one. i took off the intake and it does look like its been ported from the throttle boby to the head by comparison to a stock one. my question is ,should how much of an...

when you remove the charcoal canister, should you just cap off the fitting or attach it somewhere else?and whats the easyest way to take the steel line off the afm bracket? cut or grind it off or what?

i dont really know what its called but on my 90 na, on the stock intake tube there is a vaccuum line on the bottom of the tube where it gets bigger.can that be done away with?wanting to make a custom tube and didnt know

can anyone help me with this? my cruise control light on the dash comes on but i cant seem to get it to hold any speed. iis there a fuse that will fix it? i figured not since the light works. i drive the highway alot and really need my c/c.

where is the ecu fuse?i want to reset the ecu but dont know which one it is.

the 7m-geu? never heard of it before

i was told by toyota to unplug the no.1 solinoid and the lockup solinoid to see if it is the wiring,but i forgot to ask where the plegs are. can anyone tell me? there are 3 plugs above the starter, is that them? i dont want to unplug them unless i know if thats them. i think it is cause theres...

i cant find the code section on the tsrm. im trying to find the codes for the trans solinoids

can someone direct me to the code section of the tsrm?

im wanting to learn all i can about the gte,1jz,2jz,engines.hoping someone can pass some links onto me. thanks guys