Recent content by TBS

Anyone? Its a Aristo TB... Sent from my GT-P6800 using Tapatalk 2

Anyone knows what this nipple is for? (marked with red) It is at the bottom on the right side, if you look at the Throttle Body from the front. It ''comes out'' of the hole that's marked with yellow, and it looks liked it gets ''blocked'' in the TB gasket (also marked with yellow). If you...

Yes, Thank you guys, My car is 89'! So i guess i dont have any oil warning lights then :)

Hello I'm in the middle of a 2jz swap in my mk3 supra, and I have a few questions... Doesnt the mk3 supra have a ''oil level warning light'' in the instrument panel, or any oil warning lights at all? Is that the reason they have the oil pressure gauge in there? I bought a Used 2JZ-->MK3...

Hello I'm in the middle of a 2jz swap in my mk3 supra, and I have a few questions... Doesnt the mk3 supra have a ''oil level warning light'' in the instrument panel, or any oil warnings at all? Is that the reason they have the oil pressure gauge in there? I bought a Used 2JZ-->MK3...

Anyone know where I can find a rollcage (half-cage) for the MK3, where you can keep the rear seats, the hard top etc... also looking for one with a bolt-on/off diagonal cross brace and/or harness bar.. I found these; http://www.swracecars.com/store/view-item-search.aspx?Search=11-5070 but...

Me too :) thank you nathaninwa ;)

Okey, thanks for the great info :) The tuner said that i should drill and tap 1/8 NPT threads on the turbo-exhaust housing, so he could read the pressure there. So if i Understand you correctly, when the pressure i measure at the turbo is twise what the boost pressure is, then the housing is too...

Hey guys. I just had a conversation with the tuner that is going to be mapping my car in about a month. And he said that we'll might have an issue with backpressure on the exhaust because of the small A/R of the turbo on the 2jz... So i wonder if any of you have any experience with that kind...

Hey, Ive spent some time searching for a wiring diagram for the 2JZ Oval style alternator and I found this on http://wilbo666.pbworks.com/w/page/39441708/Toyota%20Alternators: It seems like its the 7M plug on the left, and the oval in the middle seems like the one that I have for my 2jz...

I think I know what the connectors on the two last images are.. the relays attached on the fusebox, are for the A/C system...? http://http://www.cygnusx1.net/Supra/Library/TEWD/MK3/manual.aspx?S=Main&P=014 So the two equal connectors are for some kind of A/C condenser fan? The previous...

Hey, I have stripped down the entire engine bay before painting it. And now i wonder what a couple of connectors are for. I'm swapping from 7m-gte to 2jz-gte. These plugs comes from the body harness, where it enters the engine bay, next to the battery/fusebox. This comes out next to the...

Hey, I wonder who I should buy the billet tensioner from, who has the fastest handling/service? Of course I'll choose Titan if not anyone have bad experience with them or their products? Thanks I've found Titan motorsport (cheapest with 280$)...

Okey, thanks everybody.. Not sure If I will keep the twins now, maybe just going a small single to begin with, to insure no fitment issues and jdm-turbo breakdown. So in case of keeping twins, It need to be beaten about here? :

If anyone happen to know exactly where, could you please edit these pictures of my engine bay with a circle where to beat? Would really appriciate it:) It is a MA70, LHD...