Recent content by ATL88Supra

  1. ATL88Supra

    What are your favorite things about MKIII Supras?

    the driver seat, on long drives home i have a hard time not falling asleep, its the most comfortable seat in a car i have ever been in
  2. ATL88Supra

    what are some pusher Electric fan options? quiet - efficient

    the stock fan is the best you can do, fix your intercooler so you can use it
  3. ATL88Supra

    So are we able to post on result on smog results??????

    i clearly told the person to get a good cat and check his egr. how was i wrong ?
  4. ATL88Supra

    So are we able to post on result on smog results??????

    haha fuck you man. if you are so "intimately familiar with emissions problems" you should have told him what to do. don't be a arrogant prick.
  5. ATL88Supra

    R154 or A340E/TH350

    you are going to need some diff work and steel one piece driveshaft, A/T will work fine see about getting a valve body for it and a large cooler should be all it needs up to about 500hp
  6. ATL88Supra

    So are we able to post on result on smog results??????

    those smog jockeys don't know shit never ask them what it might be, it all my years of working on old cars changing the plugs Or wires has never fixed the problem it was always the cat or egr system. i have passed smog with working cats and egr systems even with a BHG have a good look at your...
  7. ATL88Supra

    Clutch and Rust question...

    ya its fine its the same concept as brake rotor rust
  8. ATL88Supra

    Turbo blew up :(

    car is no longer receiving a correct afm reading why? you blew up your turbo duh
  9. ATL88Supra

    lean idle, rich wot, NO boost leak. any thoughts?

    if i was you i would take off all of your mods get it back to stock then repeat one mod at a time
  10. ATL88Supra

    SOS with engine wiring!!

    just to be clear you did have the block and head decked before replacing the head gasket right ?
  11. ATL88Supra

    lean idle, rich wot, NO boost leak. any thoughts?

    bottom intake manifold gasket,injecter holes(bad O-rings/to small/large), PCV system-any open or oil leaks from the block is a boost leak unless piped correctly and sealed and the list go's on you have a vac/boost leak