I think I figured it out. I degreed my cams in (BC 264's) and turns out they both needed advanced 2 degrees to match the cam card and made it start a little easier. I advanced the exhaust cam 2 more degrees and retarded the intake 1 degree and it seems MUCH better. I have my crank injector time...
Did you end up getting startup tuned OK? I'm on a V2 box and trying to get startup tuned and it seems to get better if my crank injector time is 2-3x my warm idle pulsewidth. Anything less than this and I'm showing symptoms of lean start (long cranking/sputtering, spark plugs not fuel soaked...
OK, so it turned out to be a timing issue and it was just WAY off. I just had to re-set the timing sync in the AEM with a timing light and it fired right up! The spark might not be weak after all, I'll just have to drive it and see. I didn't expect the timing to have changed with just a coil...
I got a pretty good deal on these coils and they came with a mounting bracket which I never had for the IS300 coils. Plus, I'm running a pretty small plug gap on the IS300 coils which might be causing a rough idle on my 1000cc injectors. I wanted to try opening that gap up some with a stronger...
I had IS300 coils running good in wasted spark mode on the AEM V2 and a DH61 igniter. I've just converted to Granatelli Xtreme COP coils powered by an EFI source coil igniter module wired to fire full sequential. Cranking the car over it sounds like it's only firing on one cylinder. All coils...
Please do an tell me if anything isn't working. We're still working out the kinks so-to-speak. However, if I do say so myself, it's much easier to post updates on this site than it is on regular forum software so I hope it is an incentive to share more progress. I've been guilty of the same...
Two great ideas, and in fact both of those are on my TODO list :). Seeing as I need to back date my own posts on the site lol. I'll have to include Year/Make/Model when they are adding the build to be able to search reliably by it, but it shouldn't be much trouble. Thanks for the feedback!
I'm having trouble reproducing it. I've tried it on IE9, IE10, Firefox and Chrome. However, I've had a couple other people say the same thing. I just made some updates:
Got rid of the warning when leaving/submitting the build
Fixed the Only secure content is displayed. What's the risk? warning...
I think it has some sporadic issues with Internet Explorer. Were you using Internet Explorer? And if so, what version? I'm going to try and have these issues fixed today or tomorrow.
Edit: I also see some errors logged on the back end from when you tried to submit it. Let me get these fixed and...
Approved by Supracentral
Hey guys, I just launched a new site I've been working on the side. It's a convenient way to show off your car and host your "build thread" - completely free. The concept is very simple, but I feel it's a better approach than your typical forum for this type of stuff...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.