Recent content by 67rstbkt

That's pretty cool, keep up the good work ::w00t::

That may be the best way to isolate your problem. Unplug the deck and any associated modules, check all your fuses, replace any blown ones, and see if the problem is still there.

Thanks, what do you mean by "cheap". I tried getting a new dash, but no luck there, which is why I took it out and upholstered it. The doors were equally messed up. The fabric I used looks a little weird in the pictures because of the pattern. It does look much better in person, though; at least...

The trunk area was missing pretty much everything, so I built a panel and added some much needed upholstery last night. Also took some better exterior pics.

Possibly, the ground supply to the unit is actually the parking light feed. This wire usually looks like ground with the power off. I've seen it a lot in the past, usually the parking light fuse will blow, though. Not sure if this is your issue, but it may be worth taking a look.

Well, first off, I'd like to thank all the people who helped me out with this car. I got some great tech advice as well as some parts from the for sale section. This car's come a long way from what it was a year and a half ago. Here are some before, during, and after pics. Basically, we put in a...

That's what's in there right now, I just wanted to make sure there would not be any issues later on. Thanks

Does anyone know if the after cat O2 sensor (California emmision?) on an 88 Supra (7MGE) is just a standard 4 wire? The direct fit replacement is pricey and I have a mounting plate to adapt a standard threaded O2. Thanks

Allright, I figured it out. I just needed to adjust the lever on the throttle body which turns the TPS a little bit more so that I could get a better adjustment on the TPS. I still don't know why there was a turbo model TPS on the car. Anyway, all is better; no more jerkiness. Thanks :biglaugh:

If you take offthe driver side panel, you can locate the wire going to the lock cylinder. It's been a while, but I believe there is one wire there. The lock cylinder has a switch on the backside of it, yours may be broken or corroded. You should be able to ground this wire and trick the alarm...

Where is the clicking noise coming from?

O.K, I had them re-check the part #'s and this should be the correct part. I also found them online with pictures showing the nomn-turbo clocking, and it appears that I had the wrong one in the car. Upon further inspection, I noticed that the tabs behind the TPS have been tampered with. I...

Thanks

*Edit* added some more info in the follow up posts below* So I have a bad TPS, and picked one up at the local Vato-zone. When I went to install it, I noticed mine was clocked vertically, and the new one was horizontal. I know this can't work because the throttle tabs won't hit anything on the...

Thanks, the light clears after a reset, but comes back after a month or so. I'll look into those areas. :joshers: