Wiring Help..

[Oppie1]

Hey everyone. I have been trying to tackle a 1JZ harness that has been a little bit of a nightmare due to the body plugs being cut and not having the stock connectors :3d_frown:.

I am making progress though, but I was wondering if anyone knew what these wires belong to. I can't seem to find it in any wiring diagrams I have downloaded and they are both the same freakin' color and striping.

Thanks in advance:

 

[Ds650rida]

those last ones look like an alternator plug

 

[tissimo]

Looks like the Water valve vsv (on firewall) and reverse light connector. Both tie into the same power wire (m1 plug pin 2, 7.5A gauge fuse)

 

[viperkillertt]

DAMN DUDE! That sucks. Good luck. That looks horrible. I am glad my body harness wasnt cut. I would suggest finding a good body harness and use it to kinda map out the lines.

 

[fandffan]

The first one is the BVSV connector, not quite sure why it runs down to the second one? Is the harness from a supra or other?

 

[Oppie1]

Thanks for the help guys.

I have some more wiring questions.
Each injector has a black common wire that splices into one single wire that goes into the car through the firewall. The whites are all set to the ECU pins 11,12,25 of the 1JZ ecm connector.

Can anyone tell me where the black wires would go on the body connector?

Thanks in advance: