Windsheild wiper questions???

[BJ91T]

Ok here is my problem. I pulled my wiper motor out of the engine bay and unbolted it from the little thing on the back (bell,crank,whatever you call it). and now I put the motor back it and align the crank at what I think is correct and all the wipers do it pull down and kinda sit at the bottom of the windsheild and pulse but wont ever come up. I can see that they force down and then relive the pressure (trying to come up) i can see this in the arms flexing. So how is that bellcrank supposed to be alligned on the motor to make my wipers work.



Thanks In Advance
BJ Crifasi

 

[Doward]

You actually didn't want to unbolt it from that - once you unbolt the wiper motor itself, you'll see a little 'lip' on the linkage itself, that just slides over the metal wall, and holds itself in place.

You then pop the ball-socket connection apart.

You also cry as you see the linkage bushing fall to pieces, and realize NOBODY MAKES A FREAKING AFTERMARKET BUSHING FOR US :3d_frown:

uh, yeah - mine's sitting at about 165 degrees, when looking at it from the back.

 

[BJ91T]

cool hope that gets mine working thanks

 

[BJ91T]

anychance someone has a picture of it from the back??