I have a 87 supra and I want to run either 275/35 or 295/35 on an 18 inch rim in the rear and a 245/40 in the front. Is this possible to do without rubbing, and if it is what width rim and what offset should I use. Thanks
Wheel & tires question
- Thread starter shaggyskadude13
- Start date
Whats ur suspension setup?
I dont think 11" wide tires will fit. So you may need to go with the 275s
I'm going with 18x8.5" rims in the front with 245/40/18s and 18x9.5" in the back with 275/35/18s with the car on Tein Type Flex coilovers.
I dont think 11" wide tires will fit. So you may need to go with the 275s
I'm going with 18x8.5" rims in the front with 245/40/18s and 18x9.5" in the back with 275/35/18s with the car on Tein Type Flex coilovers.
Last edited:
its on stock suspension at the moment but im goning to have to put in on coilovers because im in the process of doing a 1jz-gte swap on it right now so the front is going to sit sky high.
Im not sure what size I want to go with. I was thinking 8.5 up front and 9.5 or 10 in the rear though. Im still new to supra's so I have no idea what will fit or not.
What offset would I need to run a 10 inch wide rim. What offset were you looking at for the 8.5" and 9.5" rims.
18x10 275 fits no rub +35 offset..
going to roll my fenders and go 295s
going to try 285s on my other car with out trying to roll the fenders.. might rub a little (but just eibachs on that car so not as low) edit: 18x10 +35 as well..
going to roll my fenders and go 295s
going to try 285s on my other car with out trying to roll the fenders.. might rub a little (but just eibachs on that car so not as low) edit: 18x10 +35 as well..