Wheel studs for Weld Drag Lites?

[Janz99]

Hey guys, I am looking at buying a set of drag lites, but without the wheels in my hands, does anyone happen to know if the factory length wheel studs will work, or will I need to buy a set of longer studs? I know the welds are lugcentric, and that the lugs actually recess into the wheels slightly, but I wasnt sure if the stud was long enough to pass through the lugs or not.

I also have a set of street wheels and tires, so I need the setup to work for both.


Thanks
Ryan

 

[hvyman]

Shouldn't be a problem but if they are you can get arp longer studs and open ended lig nuts. I like muteki for lug nuts.

 

[mk3-4-me]

you need to buy the special deep well lugnuts... they sell themat autozone/advance auto or most any auto parts store.

you don't need to change the stock studs, they will work