i ahve a 89 na at right now but want to put the w58 in it. do i need a new ecu, and the wiring harness. and is there ant custoim work or does it just bolt up.
thanktyou
thanktyou
w58 swap
- Thread starter 89supra884
- Start date
it'll all pretty much bolt up AFAIK i read somewhere on here about not needing the manual ECU you can disable the n safety switch but then you could accidently start your car in gear so youd have to be careful.
you will need the driveshaft tho if thats not already on your check list.
you will need the driveshaft tho if thats not already on your check list.
ya i got the tranny, shiter, slace cylingder, soon the master cylinder, and drive shaft, then the pedal assembly
IIRC they are just bolt in the holes in the firewall for the stuff are just covered by plugs.
i dont think you need another wiring harness
i dont think you need another wiring harness
Check it out a whole tutorial . hope it helps
http://www.supramania.com/forums/showthread.php?t=75317&highlight=neutral+bypass+switch
http://www.supramania.com/forums/showthread.php?t=75317&highlight=neutral+bypass+switch