I am installing a viper 5901 remote start into my 89 turbo targa supra. I need some help figuring out where some of the wires connect.
These are the wires i am unsure of how to connect:
-White/Brown Flex parking light relay 87A
-Violet starter output (car side of starter wire)..[I'm guessing this is the wire between the starter and fuse box?]
-White/Blue remote start activation (-) input
-Light Green/ Black OEM disarm (-) 200mA output
-Light Green/ White OEM arm (-) 200mA output
-Orange ground-when-armed (-) 500mA output (just go to ground?)
Diagram:
Any help is appreciated.
These are the wires i am unsure of how to connect:
-White/Brown Flex parking light relay 87A
-Violet starter output (car side of starter wire)..[I'm guessing this is the wire between the starter and fuse box?]
-White/Blue remote start activation (-) input
-Light Green/ Black OEM disarm (-) 200mA output
-Light Green/ White OEM arm (-) 200mA output
-Orange ground-when-armed (-) 500mA output (just go to ground?)
Diagram:
Any help is appreciated.