Very Agressive wheel quesions.

[Tearlessj]

I want to know some answers here. I want something VERY agressive, like pull+roll my fenders like crazy. I was looking at some 18 x 9.5 with a 12 offset for my car. This should be very aggresive rite? I was thinking about getting these. They are 18 x 9 +10 and 18 x 10 +5. But this might me too crazy.

 

[fiyota]

personally I think I might be going with a 17x10 +35 in the back... with the car lowered I will need to roll the fenders... so I dunno about something that wide with such an offset.

 

[annoyingrob]

Not agressive enough. Go with 12" wide

BTW, those wheels are going to look HOT on a supra. I love that styling. Reminds me of old Volvo Virgo wheels.

 

[GotToyota?]

There are some sick wheels dude, go for it.

-Matt

 

[Tearlessj]

Yea, I see all these 240sx running 0 offset like its nothing. Im a member on the 240 forums and they have a bunch of aggresive wheels. Anyone have some pictures of a good low offset?

 

[Tearlessj]

I didnt want to push it too much, but here are the final wheel sizing.

18 x 8.5 +25 (F)
18 x 9.5 +28 (R)

Should work with some mild pulling and rolling.

 

[Stanzaspeed]

i was thinkin about 18x9.5 +30 on all four for my car. if it didnt work or i didnt like how they sit id just re-sell em. :icon_bigg

 

[turbotrev]

hey i gots an idea give those to me and ill give you my sawblades for an even trade??? :naughty: :naughty: :naughty: :naughty: :naughty:


just pm if it sounds like a deal :biglaugh: :biglaugh: :biglaugh:

trev

 

[SilverSupraT]

I didnt want to push it too much, but here are the final wheel sizing.

18 x 8.5 +25 (F)
18 x 9.5 +28 (R)

Should work with some mild pulling and rolling.

I like that offset but I would go with 18 x 10.5 +41 in the rear

 

[iceberg319]

I didnt want to push it too much, but here are the final wheel sizing.

18 x 8.5 +25 (F)
18 x 9.5 +28 (R)

Should work with some mild pulling and rolling.

im running same size wheels with +25 front and +30 rear and it fits and looks great!

no pulling needed

 

[Stanzaspeed]

im running same size wheels with +25 front and +30 rear and it fits and looks great!

no pulling needed

what wheels do you have on your car? any pics of the fitment?

 

[TurboFreak]

18x9 +24 Lowered on Eibachs
I say go for the ones you were looking at, it will look siick!!! Ever thought about some godfather over fenders? They would alllow for more offset if you cut the fender under the over fender..
Sorry these are all the pics I got...

 

[starscream5000]

^ Not bad, not bad .

 

[Nick Stonawski]

well if u want agressive u gotta do more then just roll ur fenders. i had mine cut and pulled out and welded to add another full inch of clearence to fit my:

Work Equip
18x9.5 +28 offset
18x10.5 +28 offset

here u can see how much the wheels stuck out when i got them new just to mock up to stock body....

 

[Stanzaspeed]

^^
beautiful nick! do you have any more shots of how the 9.5 fit up front. its almost the same as what i was considering running all around and id like to have a feeler for how it will sit.

also what size tires are you running on your equip's?

 

[supramad77]

I have 19/8.5 up front +35 and 19/10 in the back with +38 offset. Lowered on race adjustable coilovers. No rubbing and no arch rolling needed. Only down side is the max tyre size i can run is 235 front and 265 rear.

 

[starscream5000]

^nice jobe with the tails and side markers , love your MK@ BTW.

 

[Wraith]

i was thinkin about 18x9.5 +30 on all four for my car. if it didnt work or i didnt like how they sit id just re-sell em. :icon_bigg

i did 18x9.5 +35 with 275/35r18 all the way around on my car, i was a little worried when i orrdered them, but i'm VERY pleased with the way it turned out. i had to tap the lip of the fender a little bit in the front with a hammer and take the liners out, but i think its worth it.

 

[swaq]

i did 18x9.5 +35 with 275/35r18 all the way around on my car, i was a little worried when i orrdered them, but i'm VERY pleased with the way it turned out. i had to tap the lip of the fender a little bit in the front with a hammer and take the liners out, but i think its worth it.

http://home.comcast.net/~wraith272/wheelsss002.JPG

You didn't have to take the liners out of the rears, did you? Think there is enough space for 285's in the back with that offset?

 

[TurboFreak]

i did 18x9.5 +35 with 275/35r18 all the way around on my car, i was a little worried when i orrdered them, but i'm VERY pleased with the way it turned out. i had to tap the lip of the fender a little bit in the front with a hammer and take the liners out, but i think its worth it.

Mmm Sportmax 962's eh? More pics please? I've always wondered what they'd look like on a Mk3