Vacuum routing , need helpp

[Donedreamin]

Heyyy ,

Just wanted some advice on how to run my EGR , i'm missing the piece listed below and im having difficulty deciding how to route my lines as its rather difficult to determine where each line is going from the piece im missing.

http://oldschool.supracentral.com/repair/vac-hose2.gif

It's the part that all the lines come together , not to hard to noticee.

 

[jetjock]

Run the line from the rear nipple on the TB to the VSV and then to the EGR modulator...

 

[Donedreamin]

Should i run my fuel pressure line as followed -> TB , VSV than FPR ?

I don't have my car in front of me but is it basic to determine what is in / out for the VSV's?

 

[jetjock]

The fuel pressure vacuum line needs to come directly off the manifold and yeah, the VSVs need to be plumbed right...

 

[Donedreamin]

How should i run it than?

How can i tell whats in / out?

---------- Post added at 07:25 PM ---------- Previous post was at 07:24 PM ----------

Thanks btw