im putting a new 7mge motor in my 87 supra i was wondering if anyone knew were i can find like a lay out for all the plug in's and were the a couple vacuum hoses go. i dont know were a few go were the plugin to the tranny goes and the vacuum hoses on the side where the intake manifold goes.
vacuum hoses and wire harness help
- Thread starter jochoa4
- Start date
Should be a harness on the tranny with plugs and then some that come down on the drivers side that goes to the tranny. Most of the plugs are different and have different colors so they should match right up.
And for the vacuum hoses:
http://www.cygnusx1.net/Supra/Library/EPC/291420/catalog.aspx?F=1708&P=2
And for the vacuum hoses:
http://www.cygnusx1.net/Supra/Library/EPC/291420/catalog.aspx?F=1708&P=2
thanks for the vacuum hose layout. i think the other plugins go on to the starter probably ill have to check that out. but on the oil pressure switch mine doesnt have a slot that the plugin goes on too should that matter i was looking at oil pressure switch that dont have any should those matter if its plugged in or not?
jochoa4
This is an Introductions forum where you introduce yourself, your car and plans, goals, post pictures of your car, etc.
I'm moving this thread to the 7M-GE Technical Discussions.... Feel free to create a real Intro thread afterwards.
Please PM me if you have questions about this...
Jeff
This is an Introductions forum where you introduce yourself, your car and plans, goals, post pictures of your car, etc.
I'm moving this thread to the 7M-GE Technical Discussions.... Feel free to create a real Intro thread afterwards.
Please PM me if you have questions about this...
Jeff