vaccume routing

[keo]

hi, i redid my harness. It was not as bad as i thought i would be.

I put all the wires in hopefully everything is where their supposed to be.
But the good thing is my Car starts and idles normal.

I have a question on where this vaccume line goes. its under the intake mani.

take a look at the pics.
1. what im talking about.
2. side of intake mani. (where does it connect to)

http://img176.imageshack.us/img176/5643/hoseairmfqv4.jpg

http://img144.imageshack.us/img144/849/1jzsideve3.jpg

thanks in advance. i got bunch of other questions too but ill take it easy for today. lolz
thanks again
keo

 

[inline6]

Here a link to the vacuum diagram from 1jz-gte.us site

diagram

 

[keo]

Here a link to the vacuum diagram from 1jz-gte.us site

diagram

thats the first place i tried. i wasnt able to view the file.

thanks

 

[Brewster]

you need adobe acrobat to view that file.

your pics aren't working, rehost them at www.imageshack.us

 

[keo]

http://img176.imageshack.us/img176/5643/hoseairmfqv4.jpg

http://img144.imageshack.us/img144/849/1jzsideve3.jpg

I do have adobe acrobat, its just i can't view a few of them and that one ends being one of them. 80% of the others i can view.

the one's i can't view it says bad ecrypt dictionary.

 

[annoyingrob]

There should be a hose connected to that, that runs down to the PS pump, then another hose that runs back up from the PS pump to somewhere on the intake manifold. It's an idle up valve that activates when you apply load on the power steering.