TURBO and VALMOMETER

[noremacsupra]

Can you take out the valmometer from a non turbo supra cluster gauge(86-91) and replace it with a stock OEM turbo gauge from a turbo supra(86-91)?
Thank You
noremacsupra

 

[Nick M]

Yes.

And it is voltmeter, not valometer.

It won't do anything though.

 

[1988SupraDreams]

I did it to mine, it just sits there..

 

[noremacsupra]

so the turbo gauge wont work?

 

[noremacsupra]

i min after replacing?

 

[Nick M]

A 7MGE does not produce positive pressure until you supercharge the intake.

http://www.cygnusx1.net/Supra/Library/TEWD/MK3/manual.aspx?Section=Main&Page=136

 

[1988SupraDreams]

Ohh I thought you meant going from a Turbo gauge to a Voltmeter in a Turbo cluster. No a Turbo gauge won't work with a NA Supra... No turbo...

 

[MDCmotorsports]

I think he's going NA-t guys, and wanting to keep the stock gauges.

 

[BorHor]

I would keep the voltmeter there and get an after market boost gauge

 

[mkiiSupraMan18]

^ yeah, pull the ashtray out and shove it in that hole. Would be easier than doing the electrical BS anyway.

 

[lagged]

if you want to put the stock pressure gauge in there dont forget to hook up the turbo pressure sensor.

 

[jetjock]

Does the N/A cluster have the boost meter driver on it? I would think not.

And noremacsupra, is English your native language?

 

[futeki_supra]

whats a valmometer?

 

[noremacsupra]

no..i am an iraqi...alhamdulila....thank you..

Does the N/A cluster even have the driver on it? I would think not.

And noremacsupra, is English your native language?

 

[noremacsupra]

LOL..sorry its voltmeter...

whats a valmometer?

 

[noremacsupra]

No...i min..ok here is the situation...i have a 90 toyota supra turbo..and i want to replace my gauge to an NA gauge...however...i was asking if i can take out voltmeter from the NA and replace it with a turbo gauge....then put it in my car...

I think he's going NA-t guys, and wanting to keep the stock gauges.

 

[Selz202]

I have everything needed to change out to the boost gauge if you want...

The white box, Sensor and gauge itself.

 

[futeki_supra]

I am pretty sure you can just swap the clusters,
I think this has been covered before

 

[jetjock]

no..i am an iraqi...alhamdulila....thank you..

That's what I thought. Being multilingual myself I can usually discern between a non-native speaker and the lazy or downright illiterate that prowl these waters. Since I typically don't respond to them I wished to do you no injustice. Iraqi huh? You have, at least, my apologies...

 

[Big Wang Bandit]

I put a voltmeter in my 89 turbo.

You can do it but this must be done to the rear of the cluster to make it function properly

http://www.supramania.com/forums/attachment.php?attachmentid=12754&d=1168322760