titan headgasket problem?

[87trbo]

i have a 1.4mm titan headgasket, ita a 3 layer mhg and 1 of the rivets is not outside the head and iam wanting to know if the rivet supposed 2 be removed or left aolne thanks alot any kind of help would be great thanks alot

miguel

 

[dugums]

i have a 1.4mm titan headgasket, ita a 3 layer mhg and 1 of the rivets is not outside the head and iam wanting to know if the rivet supposed 2 be removed or left aolne thanks alot any kind of help would be great thanks alot

miguel

Remove the rivet.

 

[jpeek29208]

agreed

 

[87trbo]

thanks guys for the help this is my first time doing this so i just wanna make shure...but thanks anyway

 

[quake]

thanks guys for the help this is my first time doing this so i just wanna make shure...but thanks anyway

if you place the gasket on the block remove any that does not hang over the edge also do the same to the head there is one more there also

 

[TurboWarrior]

i have to do it over again because of that rivet. Glad you are doing it yourself or it might have been overlooked.

 

[87trbo]

yea that would of really sucked yo