Timing belt setting

[deomel19]

Hey guys,

I'm having trouble trying to find the correct setting/scale on my timing belt. I am not sure which number to set it to. I set it at "0" for now and seem to run fine. I hope that made sense. Any input is appreciated.

Thanks

 

[CyFi6]

With the crank pulley at 0 the mark on the cam gears should be pointing strait up. Keep in mind, if your pulley is on 0 and you don't see the marks, turn the crank one time and line up with 0 again, they should be pointing strait up.

 

[hvyman]

Always good to pull no1 spark plug and verify that its at tdc and not just go off the maybe bad dampner.