t4 to t3 adapters

[Slow Poopra 7MGTE]

is there a such thing as an adapter for a t4 exaust manifold to fit a t3 flanged turbo? or anyone have a t3 manifold theyd trade for a new in box t4 manifold, externally gated

 

[williamb82]

ive seen them before. the flange was kinda thick with recessed bolt holes to bolt to the t4 so that the bolts were flush withthe flange, then had studs in the t3 pattern. if you cant find one i know someone who could prolly make one for you.
william

 

[7mSuprapower89]

im wondering the same thing cause I need one as well as a 1 1/2 inch spacer for my t3 flanged t70.

 

[Slow Poopra 7MGTE]

if you can point me in the direction that would be sweet, i tbink i might need one willam

 

[williamb82]

ill email the guy this thread then.

 

[williamb82]

http://www.well.com/~mosk/AdapterDimensions.html

that will allow a t3 flanged turbo to bolt to the stock manifold.

now, just to find someone that has time to make them for you.

 

[group a supra]

i already have a standard to t3 adaptor if any one needs it and could get them made if need be

 

[Slow Poopra 7MGTE]

t3 to t4 adapter group a?

 

[935motorsports]

I can make these (or have them made). I will guess that you are trying to use an eBay manifold. If so, you need a spacer adapter to raise the turbo.

Let me know specifically the manifold and turbo you are trying to use.

 

[Race Bred]

http://www.turboengineering.com/miscellaneous_accessories/flanges.html

I e-mailed em awhile back... afaik it was around $50 usd

 

[Supraboostin]

a lil offtopic but does anyone know where to get a ct26 flange?

 

[abustiffy]

depending on when you need the flange, we should be putting an order in for them within the next few weeks. This was supposed to happen a LONG time ago, but other things came up. Ill make a post when we have them.

 

[group a supra]

supraboostin you want ct26 to t3 speak to me have one in my garage :naughty: