Suspension...

[steveo]

Well for those of you that live in Edmonton, Alberta, Canada you would know how rough our roads are. Just recently I was driving without any music and I heard a really bad noise comeing from the rear drivers side (would be passengers side but car is JDM). So I looked into it and it turns out to be the strut. I was planning on getting new struts on all four corners but not this soon. I have heard of a lot of people going with either the Koni's or Tokico's but I have no clue about either strut. So after all this the question I have is what struts should I order to put on my car?

It does not have to be either the Koni or Tokico if there is a better choice. As well once the money comes in I want to pit the Eibach pro kit lowering springs on if that changes anything.

Thanks for the help

-Steven

 

[IJ.]

Had a really good run with Koni over the last 20+ years, only "issue" is you need to get some good bump stops as they won't take being bottomed out.
(I've broken 2 rears due to this problem)

 

[steveo]

Had a really good run with Koni over the last 20+ years, only "issue" is you need to get some good bump stops as they won't take being bottomed out.
(I've broken 2 rears due to this problem)

Alright I will take that into consideration. Probably not the best choice seeing has how Edmonton has a ton of pot holes and pretty much any street you drive on.

 

[IJ.]

Just get the Koni urethane bump stops and you'll be fine.