SupraSport LIPP high flow elbow pics

[Clip]

I'm going through some boxes of parts to sell and found this relic. Figured I'd post some pictures here for posterity and because I'll probably never see another one again. I went with a one-piece downpipe from the CT-26 but every now and then I think about swapping this back in.

SupraSport LIPP High Flow Turbo Elbow, single-piece cast stainless, direct fit to the CT-26. Retailed for $259 back in the early 2000s.

 

[SupraTrbo89]

I have one of these sitting in my garage as well. I just removed it to run a BIC divorced downpipe. Was running it with a stainless Random Technologies downpipe. Never seen anyone else running a random technologies downpipe. I bought it about 20 years ago and it's all stainless and doesn't have a bottleneck at the flex section like the HKS dp.

 

[Clip]

Post some pictures if you can. Might be interesting to turn this thread into a collection of NLA parts.

 

[Hybrid]

Very cool. I have the Suprasport one and the Blitz version in a box somewhere.

The Blitz is cast iron from memory

The Suprasport elbow has a matching stainless downpipe to match the cast iron elbow. They both came from the Suprasport workshop Supra.

 

[SupraTrbo89]

Post some pictures if you can. Might be interesting to turn this thread into a collection of NLA parts.

Just an FYI -- there is already a thread on this forum for rare parts just like this

 

[Nick M]

 

[Nick M]

 

[SupraClaou]

Had it on my car back in 2005 ! Good upgrade for the CT26 free flow turbo exhaust

 

[loc182]

Love that part and tried to find one to buy a few years back. I have a BIC DDPR, but I would prefer the LIPP along with a DP that doesn't hang so low.

 

[gtsfirefighter]

Are you selling it? Sorry for the old thread revival.

 

[Nick M]

Love that part and tried to find one to buy a few years back. I have a BIC DDPR, but I would prefer the LIPP along with a DP that doesn't hang so low.

HKS off road down pipe, needed flex section, high flow elbow. I took the picture due to claims of HKS hanging low. It doesn't. The installation was at fault. I wasn't there, so it's hard to say what all people do.

 

[SupraTrbo89]

I use to run the LIPP elbow and a random technology dp and recently switched to a bic dpp (not recirc.) and I will say I feel like the turbo is more responsive with the bic dpp.

 

[Nick M]

I feel like the turbo is more responsive with the bic dpp.

It isn't your feelings. The divorced wastegate has better flow. The pipe diameter and shape help. I didn't the noise.