stock head unit wiring

[crrider80]

Hi, can someone tell me what each wire for the harness is for? I got a aiwa headunit andi have 1 wire to power (acc), 1 to batt direct (backup) fuse 15a, 1to ground, 1 to relay control to power antenna/to remote control fuse .5a. and 4 pairs of speaker wires. I'd like to know what the stock wires for the harness are for. Thanks
-Steve

 

[JMDigital]

If the harness is not all cut up just go to a car stereo shop and get a wire harness converter. Its like $17.00

 

[crrider80]

If the harness is not all cut up just go to a car stereo shop and get a wire harness converter. Its like $17.00

too late:icon_conf

 

[FoolishOne]

I just did mine. Let me go look for my notes.

»fo

EDIT:

I just looked:

Car...Control

Solid red...RR+
Solid white...RR-
White w/ Green Stripe...
Solid Yellow...LR-
Black...Ground
Blue w/ Yellow...
Solid Green...LR+
Solid Grey...Ignition 12V+
Pink...
Light Green...RF+
Solid Blue...RF-
Maroon...LF-
Brown...
Blue w/ Red Stripe connects to Pink w/ Blue Stripe

I am still working on the ones missing.

 

[crrider80]

I just did mine. Let me go look for my notes.

»fo

EDIT:

I just looked:

Car...Control

Solid red...RR+
Solid white...RR-
White w/ Green Stripe...
Solid Yellow...LR-
Black...Ground
Blue w/ Yellow...
Solid Green...LR+
Solid Grey...Ignition 12V+
Pink...
Light Green...RF+
Solid Blue...RF-
Maroon...LF-
Brown...
Blue w/ Red Stripe connects to Pink w/ Blue Stripe

I am still working on the ones missing.

Lets compare notes.
Lg connector
FL+Pink
FL-Purple
FR+Green
FR-Blue
12V ignition Grey
12Vbatt. Blue/yellow
Ground Black

Sm connector
RL+Black
RL-Yellow
RR+Red
RR-White

-Steve

 

[FoolishOne]

I will go quadruple check the wires tomorrow.

I have both Toyota radio plugs going into adapters, which are extended (radio relocated) and spliced into my Panasonic radio connector. I can only tell you which Toyota colors and which adapter colors match. But since all adapters conform to standards you can extrapolate which one each one is. Ex. I can see the Toyota solid red connecting with the solid purple on the adapter, apply standards, and you get that soild red == Right Rear Speaker + (according to me).

»fo

EDIT: Just for the record, this is a '91T. I don't know enough to know if they changed anything.

EDIT II: I finally found it! I knew I saved it somewhere. The attached PDF is everything you need to know.

 

[crrider80]

I will go quadruple check the wires tomorrow.

I have both Toyota radio plugs going into adapters, which are extended (radio relocated) and spliced into my Panasonic radio connector. I can only tell you which Toyota colors and which adapter colors match. But since all adapters conform to standards you can extrapolate which one each one is. Ex. I can see the Toyota solid red connecting with the solid purple on the adapter, apply standards, and you get that soild red == Right Rear Speaker + (according to me).

»fo

EDIT: Just for the record, this is a '91T. I don't know enough to know if they changed anything.

EDIT II: I finally found it! I knew I saved it somewhere. The attached PDF is everything you need to know.

Can you put this on a different format or type it out because my comp requires service pack 2 in order to run adobe reader. THANKS A LOT!
-STeve

 

[FoolishOne]

Sure.

»fo

 

[supra90turbo]

ugh... hacked factory stereo wires FTL.
Metra Connectors FTW