Stock front lip repair or replace?

[LAYZORBEEMZ]

My front lip is bent in from hitting something not sure
What, no cracks or anything it's just bent in a little. Would it be easy to repair you think or should I just upgrade or remove it?

 

[Poodles]

Usually it's the metal support that bends

 

[LAYZORBEEMZ]

Usually it's the metal support that bends

Theres a metal support behind it? I havnt had a chance to look behind it yet I just thought it was a piece of hard plastic thats screwed into the bottom of the front bumper.

 

[LAYZORBEEMZ]

Just so you guys know it's my first supra so if the question seems kinda silly I'm sorry, I just want to get comfirmation so I do it right the first time.

 

[Poodles]

76861 in this pic http://www.cygnusx1.net/Supra/Library/EPC/Figures/MBN760D.gif

But the main one is 52072 in this pic http://www.cygnusx1.net/Supra/Library/EPC/Figures/MBN801B.gif

 

[LAYZORBEEMZ]

76861 in this pic http://www.cygnusx1.net/Supra/Library/EPC/Figures/MBN760D.gif

But the main one is 52072 in this pic http://www.cygnusx1.net/Supra/Library/EPC/Figures/MBN801B.gif

Ahh I see, so can I just take that metal piece off and try to bend it back straight?

 

[ValgeKotkas]

Yes Or if the plastic is wave'ish, then I guess a heatgun can help?

 

[suprarx7nut]

I straightened mine out a while back and it was almost perfect again. Then I hit something coming back from SILV last year.

Just take off the metal support bar and straighten it, maybe heat up the lip if it's deformed much, but they're repairable for the most part.

 

[LAYZORBEEMZ]

Alrighty, thanks guys!

 

[SrBigbutt]

Mine has a little gap where it hangs to low. Thought one of the bolts for the metal piece was just missing, but its snapped in half. Got to take it off and use and ez out to get it. But i've been lazy.