some more questions!

bountykilla0118

In Pursuit of 500rwhp
Jul 16, 2005
1,088
0
36
40
Atlanta GA
doom26464 said:
i live in canada i dunno:icon_conf and that was only an estimate it might go up or down depened on what needs to be done

What does living in canada have to do anything unless your price was in Canadian dollars and if thats the case whats the conversion? Yea but when you are dealing with anything you should have a basic idea or a rough estimate of what things should cost atleast the worst case scenario and the best case scenario.

You cant just go off of what one shop tells you ...... Or you will be just like the average woman that goes to the dealership for an oil change and gets ripped a new one on the bill. What was wrong with it before you took it out?
 

doom26464

Research...research
Mar 31, 2005
863
0
0
38
Saskatoon SK, Canada
www.cardomain.com
bountykilla0118 said:
What does living in canada have to do anything unless your price was in Canadian dollars and if thats the case whats the conversion? Yea but when you are dealing with anything you should have a basic idea or a rough estimate of what thing should cost atleast the worst case scenario and the best case scenario.

You cant just go off of what one shop tells you ...... Or you will be just like the average woman that goes to the dealership and get ripped a new on the bill. What was wrong with it before you took it out?
umm I live in canada next close machine shop is like hour drive. The engine Had a rod knock and Plan On just getting a stock rebuild with arp hardware wich I already have.

Im not trying to get ripped off but I have seen other supra in the calgary area and such pay similar prices so I don't think im getting tooken or anything?
 

bountykilla0118

In Pursuit of 500rwhp
Jul 16, 2005
1,088
0
36
40
Atlanta GA
doom26464 said:
umm I live in canada next close machine shop is like hour drive. The engine Had a rod knock and Plan On just getting a stock rebuild with arp hardware wich I already have.

Ok so they will need to cut the crank, match the bearing, reshaped the rods and endcaps. Thats not very expensive call around and get quotes on the info i just gave you.