Some help please

[SupraKid]

Put my 7mge in. Some questions i have is, how many bolts go into the motor to the tranny i see 4 that line up with the motor, and 2 holes with threads in? 2nd question is are the starter bolts 2 diffrent lengths? Final question i cant seem to get the ecu back into place teres 1 bracket toward the fire wall idk what side attaches to that and the other 2 sides. Sorry if i sound annoying but i figured id come here for some help.

 

[hvyman]

there's about 6 bolts for tranny to block. then 4 bolts on the bottom for the brackets that go from the engine to tranny. starter bolts are the same size.

the ecu plugs face the pass side and you can read the 7m ge part looking up side down. if you point it in that direction you will see how it bolts up.

 

[SupraKid]

Damn, i figured it was 6, 2 one the bottom of the tranny dont line up with the motor and i know its in right. ill take another look tomorrow its too damn cold. Thanks for the help man!

 

[SupraKid]

came up with a new question, how do i bypass the neutral safety switch(i have a 5spd, harness is auto) and wire up reverse lights?

 

[suprajay87]

try this link.
http://www.supramania.com/forums/showthread.php?4188-7MGTE-Auto-to-Manual-Tranny-Question
there are 2 different ways on that thread one where you cut the engine harness and if you scroll to the end that one you don't cut the harness. Hope it helps

 

[SupraKid]

^Thanks for the link, ill just have to take a look after i shovel,fuckin snow is gonna slow me down!