small hose line under 2jz water pump

[keo]

On the 2jz water pump there is a small hose fitting, i want to know where that leads to. From looking on the 1jz water pump it doesnt have one.

Its not the one near the thermastat (that leads to the turbo's)
its the in the front on the bottom of the 2jz water pump. (i dont have a digi cam at the moment so no pics available)

Im going e-fan, almost everything is done, just connecting everything back in place.

thanks
keo

 

[keo]

ok got pics already, (a small steel line) its the one circled in blue. Where does it lead to? do we even use it at all?

c'mon guys, i want to drive my baby!! havent ridden her in 4 months cause of winter and snow.

thanks
keo

http://www.geocities.com/tomadaa/2jzwaterpump.JPG

 

[tsuper92]

thats the weep hole for when the bearing goes bad.

 

[keo]

does it connect to somewhere?

 

[conundrum07]

Bringing this back from the dead. Anybody have more input?

 

[Evilempire1.3JZ-GTE]

The weep hole is on the bottom of the water pump it tells you when the seal blows out of it if you see it leaking water then replace it and no a hose does not go on it!

 

[conundrum07]

Sounds good, I was going to cap it off but it looks like i dont need to. Thanks :bigthumb:

 

[jmcboost]

Just put a new pump on my 2J and was wondering the same thing. Thanks for the info.

 

[Wills7MGTE]

jesse ur so dumb LOL everybody knows thats where the coolant for the flux capacitor goes

 

[Evilempire1.3JZ-GTE]

Dont feel so bad I had the same question 3-4yrs ago not all water pumps make it look like a nipple that attaches to a hose some water pumps just have a hole on them.