Rising Sun Engines

Clip

Clip

The Magnificent Seven
Oct 16, 2005
2,738
9
38
36
Virginia
I brought this up in a recent thread, and emailed the guys at Rising Sun Engines for a quote. Here's the returned email:

Engine Size or Model: 7MGTE 3.0 liter 6 cylinder


Carb or Fuel Inj:: Fuel Injected


Please quote for a:: Motor & Transmission


Comments: Looking to swap a turbo version of the 7M, I was wondering if i could get a complete drivetrain.


---------------------------------------------------------------------------

Thanks for your inquiry. Yes, we have an engine in stock for your application. Your cost is $895.00 for a used *tested* non turbo. Turbo motors are 1595.00 for used *tested*. In most cases freight within the lower 48 states is between $50 and $150.

It's a very good idea to replace the timing belts before you install the engine. If you have ever experienced a timing belt failure, then you know what we mean. We can also install new timing belts in the engine before shipment if you like. Your cost is only $75.00. for both the belts and the labor.

If the engine is shipped outside CA, there is no sales tax.

See our web page at http://www.risingsunengines.com/index.php?pg=engines04#testing for more info about our dynamic test procedures (very important as this is what sets us apart from the competition). You will also find information about mileage, warranty, etc. on our web site at http://www.risingsunengines.com/index.php?pg=faqs04#warranty

If you have any more questions, please e-mail us. If you would like to make a purchase, call us toll free at 1-800-660-4664.

This price quote is valid for 10 days but is limited to stock on hand.
 
87_7MGTE

87_7MGTE

SOLD :(
Mar 30, 2005
278
0
16
Bellingham, WA
$1595 seems VERY high, IMHO. you could buy a turbo parts car for less than that, or even better, a full 7M-GTE swap alreday shimmed for way less. Changing the timing belt and HG is good advice though.
 
Clip

Clip

The Magnificent Seven
Oct 16, 2005
2,738
9
38
36
Virginia
my point was to just give some general info about a company that noone seemed to know on these forums. i didn't say they were good or anything, just basic information about those prices that werent listed on the site.
 
87CandyBlueT

87CandyBlueT

Banned
Feb 8, 2006
553
0
0
39
Kentucky (NKY)
F*** that!
Here's a good quote for rebuilt 7m
This is a quote for ARP head studs and HKS 2.0 MHG thats what i asked for when i got this response. You can also get different HG brans etc. and even forged internals and Bill is awesome he can get you GOOD discounts on extra stuff you might want when you buy an engine.


We do have 7M-GTE rebuids available. They are $1,995 and include the following new parts: Timing Belt, Tensioner, Water Pump, Front & Rear Crank Seals, Cam Seals, Valve Cover Gaskets, Main & Rod Bearings, Pistons & Rings, Valve Stem Seals, 2.0mm HKS Head Gasket, and ARP Head Bolts. We have the block decked, and the head surfaced before assembly. If you would rather the ARP Head Studs it will be an additional $45. Shipping to you will be approximately $105 to a business, and I will split that with you, so you will be looking at $50. If it needs to go to a residence there will be an additional $125 from the shipping company.

If you have any other questions please let me know.

Thanks,
Bill Bauch
JARCO, Inc.
770-479-4942
www.jarcoinc.com


BTW anybody in Northern kentucky area if you ever need something heavy delivered to a business for a good shipping discount i have 2 cousins with garages in campbell co. and an uncle with his own garage in frankfort. I ship exhausts and stuff there.
 
OneJArpus

OneJArpus

Supramania Contributor
Jul 1, 2005
2,798
0
0
41
Newark, New Jersey, United States
F*** that!
Here's a good quote for rebuilt 7m
This is a quote for ARP head studs and HKS 2.0 MHG thats what i asked for when i got this response. You can also get different HG brans etc. and even forged internals and Bill is awesome he can get you GOOD discounts on extra stuff you might want when you buy an engine.


We do have 7M-GTE rebuids available. They are $1,995 and include the following new parts: Timing Belt, Tensioner, Water Pump, Front & Rear Crank Seals, Cam Seals, Valve Cover Gaskets, Main & Rod Bearings, Pistons & Rings, Valve Stem Seals, 2.0mm HKS Head Gasket, and ARP Head Bolts. We have the block decked, and the head surfaced before assembly. If you would rather the ARP Head Studs it will be an additional $45. Shipping to you will be approximately $105 to a business, and I will split that with you, so you will be looking at $50. If it needs to go to a residence there will be an additional $125 from the shipping company.

If you have any other questions please let me know.

Thanks,
Bill Bauch
JARCO, Inc.
770-479-4942
www.jarcoinc.com


BTW anybody in Northern kentucky area if you ever need something heavy delivered to a business for a good shipping discount i have 2 cousins with garages in campbell co. and an uncle with his own garage in frankfort. I ship exhausts and stuff there.
Click to expand...


2195 shipped ;) from jarco was my quote, and i will be getting this with in 2 months for my 88T :)
 
bigaaron

bigaaron

Supramania Contributor
Apr 12, 2005
4,692
1
0
50
Pomona, CA
www.driftmotion.com
As for the $2000 fully rebuilt 7m-gte, I would trust it as far as I could throw it. They said they would deck the block and head, but they didn't mention honing the cylinders, line bore the mains, resizing the rods properly, polishing the crank, balancing, valve job, etc... Changing the valve seals is not a head rebuild. I have seen the way these cheap engine rebuilds are done, and it's not pretty.

If it's cheap it must be good, right? :3d_frown:
 
Last edited:
squrillbait

squrillbait

New Member
Jun 5, 2005
44
0
0
wichita, ks
i got mine for $900/free shipping from jazzproparts, so far its a good motor, if i had to do it over though i would buy a rebuild from someone like JARCO....... has anyone got one from horsepower freaks? they offer them for 1500.
 
You must log in or register to reply here.
Top Bottom