re-wired knock sensor

[Metal-Inc.]

i re-wired my knock sensor last night and took it out for a spin this morning and the problem has gotten worse. uphill it almost stalls and sometimes does stall. on flat land i can barely touch the throttle without it making a sputtering noise, this KS thing is starting to frustrate me. i don't know what it could be, i reset the ECU and am not showing any codes.

Thanks

 

[DaSuprawolf]

your car isn't going to run that bad just from a knock sensor problem......

i had mine unplugged for like a month once. it ran fine just had no performance.
no codes?? check timing? vac. leak?

 

[Metal-Inc.]

i checked, i have no codes, how do i go about checking the timing? and i cant see any vacuum leaks that i am aware of but there happens to be no air filter on the end of the VTV.
Thanks

 

[bluedragon17]

check timing........... jumper e1 to t1 plug in timing gun and point at harmonic balancer. should be at 10* stock timing. you should see a notch near the block and then numbers on the balancer itself. it should be at 10*