power steering idle air control valve ??

[NashMan]

well i have boost leak right now or my afm is bad any way

i got rid of all my vsv and e missons and such any way's i was not to sure but does the power streeing ideal air control vavle need a stroung sores of vacume or small like kinda off the thottle body

i gonna test it today to see if leak's as well

 

[NashMan]

bump any one have clue on this

 

[NashMan]

http://www.cygnusx1.net/Supra/Library/TSRM/MK3/manual.aspx?S=SR&P=39

 

[NashMan]

well i cheak it out and yes the vavle is broken

now did it break cause to powerfull of a vacume or just cause it's freaking old

 

[CPT Furious]

My idle valve for PPS broke because it was freakin' old, as you say.

 

[NashMan]

yae i think just going to ditch it any way just ahve to find time to do it

 

[3p141592654]

It doesn't need any vacuum! Its an air bleed to the surge tank to increase idle speed when the PS pressure exceeds ~1000psi at full lock. That's right, that little valve handles 1000psi, which is why it costs so much. Read all about it here.

http://www.cygnusx1.net/Supra/Library/TSRM/MK3/manual.aspx?S=SR&P=44