ok, couple newb questions about single turbo

[huntingcorn]

im doing a 1jz fc swap and i bought a SS oil line from a member, no fittings. i cna get fittings but where do i install the oil line into the block?

ALSO
does anyone know what belt to run if i dont run the AC compressor? i need power steering but no ac...

 

[86_sports_1jz]

im doing a 1jz fc swap and i bought a SS oil line from a member, no fittings. i cna get fittings but where do i install the oil line into the block?

ALSO
does anyone know what belt to run if i dont run the AC compressor? i need power steering but no ac...

there should be a small port where the old oil feed use to be with a banjo bolt i believe... you just gotta get the right fitting to screw in then you'll be in business...

 

[cbutler]

There will be two oil feed ports for the stock twins. You can block one off and use the other for the single. It is a 12mm hole, and you can get a 12mm to -4 fitting from driftmotion if you need.
http://store.driftmotion.com/static/i-1jz2jz7moiloutletadaptorfitting.php