oil filter relocation.......HELP!!!!!!!

[bluedragon17]

Ok so im in the process of a BHG re-build and full NA-T the issue im running into is this. I bought a oil filter sandwich adapter to run an oil cooler but it hits the compressor side of the turbo. I was wondering if i can run the sandiwch adapter to the oil cooler AND an oil filter relocation kit. Basiclly its gonna run oil in two directions i need help in figuring out how to incorporate both the oil cooler and a relocation kit. and how to get it done correctly the first time. Please help me as this is the last step i need to figure out and get done so my car can get back up and running again!!!! thanks in advance to all

 

[jsnowman76]

http://www.supramania.com/forums/showthread.php?t=31378&highlight=oil+filter+relocation


this is the closest thing I could find to your problem I hope this helps out a little bit

 

[bluedragon17]

yeah read that i was wondering if i had to run an oil thermostat or not but according to that i do if im upgrading but im sticking with the stock oil cooler with a custom setup. also anyone ever used one of these???

http://www.jegs.com/webapp/wcs/stores/servlet/product_10001_10002_187568_-1

and i think its got a built in t-stat so if it does im juts gonna run this one to simplify things any help would be great thanks!!!!!!