Need pic of greddy exhaust
- Thread starter huntin5L
- Start date
its really quite... I was running a 3"elbow/downpipe, test pipe, and the greddy and it was still super quiet. Since then i took the greddy can off and put on a straight through muffler ... got some top end out of it..
Thanks for the posts guys. That is my exhaust, i got a really good price on it so i bought it. I really want the nur spec, but i guess this will work. So i guess all i need is a dp and and test pipe since the previous owner welded the cat in place, so im gonna get rid of the whole thing. But as far as sizes, what will i need, i will in the near future have my td06 on with the bigger greddy elbow, right now though i just want to get a dp and test pipe to the stock elbow. Do i have to worry about sizes since i will soon have a bigger elbow?
best exhaust setup IMO:
full three inch downpipe to the greddy sp, and an electric cutout where the cat would be.
full three inch downpipe to the greddy sp, and an electric cutout where the cat would be.
I like the looks of that greddy SP!
I have a tanabe which is very similar but the outlet on the SP is angled in nicely where the tanabe kind of sticks out flat.
I have a tanabe which is very similar but the outlet on the SP is angled in nicely where the tanabe kind of sticks out flat.
This site has the boost activated cut outs (eaiser set up than the electric ones), and yes if you are going to do a test pipe it should be 3" if you already have a 3" exhaust system. (if you don't already have an exhaust system, don't bother with the test pipe, yet).
http://www.atpturbo.com/
Matt
http://www.atpturbo.com/
Matt