need help with the wiring harness 56k no no

[1TuffSupra]

Hey guys Im wrapping up the swap on my car and need to know where a few of the electrical connections connect to. Here are the pics of them sorry they are so big. There is also the one that sits right on top of the tranny. What does that connect to? It doesnt seem to reach any of the connectors on the harness. I also need some help with putting the glovebox back in the car. Ive got the plastic insert in there that protects the ecu, but I cant for the life of me remember how to put the door back in so that it will close. Do the little tabs on the bottom of the door get screwed in in the front of the metal support or behind the metal support?

This one is pretty big, but I dont see what it could possibly connect to.

These last two pics are of parts of the harness that are part of one big branch. I made the entire branch of the harness run through the runners of the intake manifold, is that how its supposed to go? are the two metal rings just ground wires? And what about the white one?

same thing with this one

 

[tookwik4u89]

#1 The answer is in the pic, it's for the alternator.

#2 The metal rings are for ground, they bolt to lower intake...the 4pin is for trans harness it looks like(auto?)

#3 for one of the vsv's under intake...prob egr

 

[1TuffSupra]

ok, i guess it plugs up where that hose is located. I will remove it and try to find where it hooks up at. Grounds are easy, ill take care of that. My car is a 5spd so i guess i dont have to worry about that one. Thanks, have any idea where that plug that sits on the tranny goes to?

 

[NashMan]

the grounds are for the injectors